Konica AutoReflex A2 Seals
$8.75
USCamera custom light seal kit fits the Konica AutoReflex A, A1000, A2, A3, T, T2, T3, and the T3n 35mm film cameras. The body casting used for these models is the same. This 5 piece foam seal kit includes lower/upper door channel seals for the camera body, camera body hinge seal, back cover door latch plate seal, and a mirror cushion.
USCamera light seal placement guide for this Konica, go here
In stock
0
People watching this product now!
Description
Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n | 35mm SLR
USCamera | Custom Light Seals | Konica 35mm Film Cameras
Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n
New and used Konica film camera parts | USCamera
See all USCamera Light seal kits for Konica film cameras.
USCamera Free Monthly Download | Every Month | Always Free | Go here
Please contact us with any questions you may have. We add new parts, also manuals, and light seals are added almost every day.
USCamera Kits Start with Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you have a camera accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam is best. We have foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness in stock. start here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here.
USCamera Since 1998 | Service Parts for Cameras, Flash, Lenses | Light Seals, Foam Sheets | Service Manuals Part Lists | Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n
For help with your light seal kit install, please start here. Following the link to a short read can improve the quality of your light seal install.
USCamera light seal kit placement guides can help you if the old light seals have already been removed, go here.
The Light seal placement guide for these Konica film cameras is coming soon.
USCamera also makes light seal kits for over 100 film cameras. See all light seal kits in stock.
Konica AutoReflex A2 Seals | A | A1000Â | A2 | A3 | T | T2 | T3 | T3n | 35mm SLR
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean. Make sure to remove all traces of the old door channel seals, mirror cushion, door hinge, and anywhere else you are replacing old seals. The finest adhesive in the world will not adhere to that sticky goo that was once a light seal. Finally, a proper install will give you thousands of light tight exposures.
USCamera | Genuine Konica Camera, Lens Parts | Also Light Seal Kits, Foam Sheets, Service Parts Downloads + | Konica AutoReflex A2 Seals
Konica AutoReflex A2 Seals | Premium Quality Open Cell Foam Lasts Years. Same High-Quality Japanese Foam As Original | Konica Film Cameras | USCamera Foam
Lastly, though no longer making cameras, Konica-Minolta remains very successful. Explore them here.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.