Sold out
Hasselblad Lens-Body Cocking Tool
Hex shaped cocking tool for Hasselblad. One end fits the cocking coupler on Hasselblad lenses and the other fits the slotted coupler visible from the back with the film back removed and the body released so the light baffles are in the raised position. This tool can allow you to easily cock the lens shutter that has released when removed it from a camera body. Also, you can attempt to partially cock a camera body that has jammed and attempt to remove the lens. Use of this tool has allowed the camera user to return their camera or lens to a usable condition. Caution and Extreme Care Required using this tool as you can do damage both to the body and lens internally. Remember you are using this tool on a precise instrument.
0
People watching this product now!
Description
Hasselblad Lens-Body Cocking Tool
USCamera | Technical | Fine Instrument Tools
Hasselblad Lens-Body Cocking Tool
Technical Tools for Imaging Service
Please Contact us with any questions or part requests. We add new parts to our online inventory every day.
High Quality, for a precise fit, Hex shaped cocking tool for Hasselblad.
One end fits the cocking coupler on Hasselblad lenses and the other fits the slotted coupler on the camera body. Visible from the back with the film back removed and the body released, so the light baffles are in the raised position.
This tool can allow you to easily cock the lens shutter that has released when removed it from a camera body.
Also you can attempt to partially cock a camera body that has jammed and attempt to remove the lens.
Hasselblad Lens-Body Cocking Tool
Use of this tool has allowed the camera user to return their camera or lens to a usable condition. Other times a repair was required.
Caution and Extreme Care Required using this tool as you can do damage both to the body and lens internally. Remember you are using this tool on a precise instrument.
Out of thousands of repairs, many times I have had to disassemble the lens to remove it from a jammed camera body because parts had broken in the lens shutter.
Display all available hand tools at USCamera here.
Hasselblad Lens-Body Cocking Tool
USCamera Online Since 1998
Parts | Digital – Film Cameras | Light Seals | Lens Parts | Flash Spares
First of all, we have many part numbers in stock. The most asked for parts include battery covers, Fresnel lenses, lens mount screws, shutter units, wind gears, wind levers, circuit boards, and focus screens.
USCamera stocks light seal kits for over 80 different camera makes and models in stock. See all available light seal kits here.
USCamera | Downloads Parts Tools More. | Technical hand tools for servicing cameras, lenses and other photographic or imaging equipment.
Contact us with any questions or requests | Hasselblad Lens-Body Cocking Tool | USCamera Tools and more.
Reviews (0)
Shipping & Delivery
Related products
1964 Nikon F with 50 1.4
USCamera made laser etched drawing onto MDF wood product of 1964ish Nikon F with Nikkor-S Nippon Kogaku 50 1.4. Meticulously drawn by hand then imported into the laser for etching. The image shown of the etching can't show the details and sharpness of the drawing. The natural resins of the wood adds a unique shading to this drawing. I have etched many exploded views. Nothing has shown this much detail. I find it interesting every time I take a look. Once the drawing is finished, I apply a light coating of clear lacquer to seal the wood. A very unique and collectable item that should display beautifully anywhere. Please note. This a wood product, and like all wood, it may be a little different in color, density, texture, and may etch a little differently. It only makes each more unique. Therefore, though very similar, no two drawings will be exactly alike. This drawing measures approximately 12 x 19. Made in the USA by USCamera.
JIS Cross Point Screwdriver #00-1.5mm x 40mm
USCamera quality screwdriver handle with a JIS cross-point tip #00 1.5mm x 40mm long. Interchangeable tips are in stock. Made in Japan for USCamera. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
JIS Cross Point Screwdriver Bit #00-1.5mm x 80mm
USCamera premium quality screwdriver bit, JIS Phillips cross-point tip #00 1.5mm wide x 80mm long. Made in Japan for USCamera. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
This is the screwdriver bit only. A lifetime handle with this #0 1.5 x 80 bit installed is available.
Lens Element Sucker Tool
Premium quality lens element removal tool kit. This kit includes suction bulb, short tube 33mm, long tube 95mm, 2 pieces 20mm suction cap, and 2 pieces 4.80mm suction cap. Not made for use with water. Made by UN of Japan. As the name states it is a sucker(suction) tool. Made for removing lens elements from group or element housings. When used carefully, I was able to hold, remove and place large elements, 65mm diameter and smaller. It is a high-quality tool and lasts for years. I know because I purchased one of these tools from Vivitar in 1978 and I still use it today. Some of the pics in this ad are of the old box and tools.
Please Note. The is tool is not made to remove elements by twisting the tool in the hope of turning the element in place.
ROR – World’s Best Lens Cleaner
The best lens cleaner in the world. You can see the difference! One example. I have cleaned hundreds of my friends glasses. Everyone wants to know, immediately after putting their glasses on, what did I use on the lenses. Available in 1 ounce dropper bottles or 2 ounce spray bottles. "the difference is clear"
Use option to select 1 ounce "squeeze" bottle or 2 ounce spray bottle.
Rubber Lens Ring Tool – LT10
USCamera LT10 rubber lens tool. Measures 26mm long, 49mm and 41mm diameter with a 5mm wide contact surface and a 4.9mm recess. The LT 10 can easily remove the name ring Rubber tools like these are invaluable when working on lenses and camera bodies. The surface friction allows you to easily remove stubborn name rings. Cleaning the contact surface with a ketone, Acetone or 409, can add additional friction. USCamera made in the USA. The LT10Â is the most used rubber tool in the shop. Just today, used to remove the name rings on a Nikkor 50 1.8 pancake lens, and a AF Nikkor 50 1.8 old style lens. Only took seconds!
Reviews
There are no reviews yet.