Fujica ST901 Light Seals
$8.50
USCamera custom light seal kit for the Fujica ST901 film cameras. This 10 piece custom USCamera foam kit includes lower/upper back cover channel seals, door hinge seal on the back cover, back cover latch plate seal, lower/upper latch plate seal on the camera body, lower/upper camera body channel seals, a replacement mirror cushion and the back cover film reminder window seal.
TECH NOTE. The channel seals on the camera body are not installed starting at the hinge end of the body, like many cameras. Lens mount facing down. For the ST901, these seals are carefully centered in the straight part of the body channels, before the channel turns downward. When installed properly, there will be little if any that seal material leftover. That is the factory install procedure. Also, the proper seals required there are shorter than you would imagine.
UScamera light seal placement guide for this Fujica film camera go here.
In stock
0
People watching this product now!
Description
Fujica ST901 Light Seals
USCamera | Custom Fujica Light Seals | Fuji Film Cameras
Fujica ST901 Light Seals | USCamera Custom Light Seal Kits | Fujica Film Cameras
35mm Fujica SLR Film Cameras
USCamera has thousands of new and used Fujica film camera parts. Look here
Please Contact us with any questions or requests. New light seals, downloads and also new parts are added almost every day.
Top Quality kits using imported open cell foam.
Maybe you would like to make your own light seal kit? Perhaps you have a special film camera accessory that requires a special size of the light seal material. We can help.
Sometimes sheet foam is the best solution. We have foam sheet material in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm. Available here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. In stock here.
Fujica ST901 Light Seals | Film Camera Repair Kit | Fuji Film Cameras
Fujica 35mm Film Cameras, Fuji Light Seals, Fujica light seal kits
For help installing light seal kits please go here. For that reason, following the link to that short read can improve the quality of your light seal installation.
USCamera light seal kit placement guides can really help you also. Especially if the old light seals have already been removed before you acquired the camera. Go here
In addition, the light seal placement guide for this Fujica film camera. Go here.
Light seal kits for Fujica Fuji Film Cameras here.
First of all, the most important and time-consuming work is removing the old seals. Focus on clean, clean, and clean. Likewise, the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals, must be completely removed. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Always exciting and film cameras are in the past, for now. However, Fuji is still going strong. See the wonderful world of Fuji. Go here.
USCamera | Genuine Fuji Fujica Film Camera, Flash, Lens Parts | Light Seal Kits, Foam Sheets | Fujica 35mm Film Cameras | Fujica ST901 Light Seals
Fujica ST901 Light Seals | Premium Quality Open Cell Foam Lasts Years. Same High-Quality Japanese Foam As Original | Fujica Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Olympus ECR Light Seals
USCamera custom light seal kit for the Olympus 35 ECR rangefinder film cameras. This seal kit includes 2 door channel seals for the camera body, 2 back cover channel seals, and 1 door hinge seal on the camera body.
Light seal installation, and removal help is always available.
Peeling the foam from the backing can be difficult for some. This video may help
USCamera custom light seal placement for this Olympus film camera here
Olympus OM-10 Light Seals
USCamera light seal kit for the Olympus OM10 film camera. This 7 custom piece seal kit includes lower/upper door channel seals for the camera body, 1 camera body door hinge seal, front mirror cushion, back cover latch plate seal, 1 lower film cassette spring cushion and 1 upper film cassette spring cushion.
Foam remove and replace help is always available, here.
USCamera light seal placement guide for this Olympus film camera here.
Removing the foam from the backing can be difficult for some. This video may help.
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Reviews
There are no reviews yet.