Fujica ST605 Light Seals
$8.50
USCamera custom light seal kit for the Fuijca ST605 ST605n ST705 and ST705w. This kit includes 2 channel seals for the camera body. 1 door hinge seal on the back cover, 2 latch plate seals on the body, 1 back cover latch plate seal and 1 replacement mirror cushion. All seals have the adhesive applied. The “W” designation on the ST705 means that model would accept the optional winder for powered film advance.
USCamera light seal placement guide for this Fujica camera here.
In stock
0
People watching this product now!
Description
Fujica ST605 Light Seals
USCamera | Custom Light Seals | ST605 ST605n ST705 ST705w
Fujica ST605 Light Seals | 35mm Film Cameras | USCamera Foam
New/Used Fujica Film Camera Parts
For help installing light seal kits, please start here. Also, following the link to a short read can improve the quality of your light seal installation.
Please Contact us for any questions you may have. Also, new downloads, parts, and light seal kits and parts are added almost every day.
All USCamera Light seal kits available for Fujica and Fuji film cameras. Go here
Fujica ST605 Light Seals
USCamera Light Seals | Premium Open Cell Foam
Do you want to make your own light seal kit? Maybe you have a camera accessory that requires a special size of the light seal material. We can help with that also.
Sometimes sheet foam is the best solution. We have foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness available. Go here.
In addition, we have many different strips of light seal material already cut to width and 220 mm long. Start here. Fujica ST605 Light Seals
USCamera light seal kit placement guides can really help you also. Especially if the old light seals have already been removed before you acquired the camera. Start here
USCamera light seal placement guide for this Fuji film camera. Go here.
Currently making light seal kits for over 90 popular film cameras. See all USCamera light seal kits available for film cameras. Start here
Medium Format Film Cameras | Fujica ST605 Light Seals
First of all, the most important work to be done is to remove the old seals. Focus on clean, clean, clean.
In addition, clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals.
Furthermore, the finest adhesive in the world will not adhere to that sticky, ooey-gooey residue that was once a quality light seal. Finally, proper installation will give you thousands of light tight exposures.
Film cameras may be in the past, for now, however, Fuji is still going strong. Look here.
USCamera | Also Genuine Canon Camera, Flash, Lens Parts Plus | Light Seals, Foam Sheets | Service Manual Downloads | Fujica ST605 Light Seals
Fujica ST605 Light Seals | Premium Quality Open Cell Foam Lasts Years. Also Same High-Quality Japanese Foam As Original | Fuji Film Cameras | USCamera Foam
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon EF Light Seals
USCamera custom light seal kit for the Canon EF Auto film cameras. The kit includes 2 door channel seals for the camera body, 1 door hinge seal and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the backing and press into place. Top Quality kit using imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Olympus OMG Light Seals
USCamera custom light seal kit for the Olympus OMG OM20 film cameras. This 7-piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, 1 mirror cushion, 1 back cover hinge end upper channel seal, and lower/upper seals just under the film cassette spring (latch end, back cover).
USCamera light seal placement guide for this Olympus film camera here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Yashica FX-D Quartz Light Seals
USCamera 6 piece custom light seal kit for the Yashica FX-D Quartz film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 back cover latch plate seal, and 1 mirror cushion.
USCamera light seal placement guide for this model Yashica film camera here.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Reviews
There are no reviews yet.