Canon Rebel – Rebel II Film Window Foam
$6.50
USCamera custom film reminder window foam seal for the EOS Rebel, and Rebel II 35mm film camera bodies. The adhesive already applied. To install you just peel off the backing and press into place. A adhesive delay is a good idea to give you time to place this seal. Package of 2 window foam seals. USCamera foam is Made in Japan.
In stock
0
People watching this product now!
Description
Canon Rebel – Rebel II Film Window Foam | 35mm Film Cameras
USCamera | Canon 35mm Spares | EF EF-S Lens | EOS | Speedlite Flash | Owner – Service – User Manual Downloads | Vintage 35mm Service
Canon Rebel – Rebel II Film Window Foam | 35mm SLR’s
New – Used Canon 35mm Parts
USCamera Free Monthly Download | Every Month | Always Free
Please contact us with any questions you may have. We add new parts, also manuals, and light seals are added almost every day.
See all USCamera Light seal kits for Canon.
Please contact us with any questions or requests.
USCamera Kits Start with Premium Open Cell Foam | Canon Film Window Foam
Do you want to make your own light seal kit? Maybe you have an accessory that needs light seal foam. We can help with that also.
Many times sheet foam is best. We have foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness in stock.
We have many foam strips already cut to width and 220 mm long.
USCamera Online Since 1998
Genuine Parts for Cameras | Flash | Lenses | Light Seal Kits | Foam Sheets | Vintage Parts for Film Cameras
USCamera Since 1998 | Service Parts for Cameras, Speedlite, Lenses | Also Light Seals, Foam Sheets | Service Manuals Part Lists | Canon Rebel – Rebel II Film Window Foam | 35mm SLR’s
For help with your light seal kit installation and removal. Also, following the link to a short read can improve the quality of your light seal install.
USCamera light seal kit placement guides can help you if the old light seals have been removed.
Light seal placement guide for the Canon AE-1 film camera.
USCamera also makes light seal kits for over 100 film cameras. See all USCamera light seal kits for Canon cameras.
Canon F1 New Mirror Cushions
Of course, we have photo-grade foam, the same foam used in our light seal kits. Shop all cut strips, foam sheets, and light seal kits in stock.
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean.
Make sure to remove all traces of the old door channel seals, mirror cushion, also door hinge foam, and anywhere else you are replacing old seals.
The finest adhesive in the world will not adhere to that sticky goo that was once a light seal.
Finally, a proper install will give you thousands of light tight exposures.
Canon Rebel – Rebel II Film Window Foam | 35mm SLR’s
Same High-Quality Japanese Foam As Original | Canon Film Cameras | USCamera Foam
Lastly, made to inspire, see the new Canon products, look here.
Additional information
| Weight | 1 oz |
|---|---|
| Canon F1 New Mirror Cushions |
Package of 5 – Mirror Cushions ,Package of 10 – Mirror Cushions |
Reviews (0)
Shipping & Delivery
Related products
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canonet 19 Light Seals
This custom light seal kit fits the older series Canon Canonet series made prior to 1970. They are generally bigger and heavier rangefinder cameras than the later models. This kit fits the Canonet 17, 19, 25, QL17, QL17 L, QL19, QL19 E and the QL25. The kit includes 1 each upper channel body seal, 1 lower channel body seal, door latch plate foam seal and 1 door hinge seal on the body. All seals have adhesive already applied and to install you just peel off the backing and install.
USCamera light seal placement guide for this model Canon film camera here.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Ricoh KR Light Seals
USCamera custom light seal kit for the Ricoh KR10, KR10 Super, KR10X, XR6, XR7, XR10, XRS, and the Sears KS Super, KSX Super film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion. Light seal placement guide for this USCamera Ricoh kit.
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica FR Light Seals
USCamera custom light seal kit for the Yashica FR FR1 FRII film cameras. This kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
USCamera custom light seal placement guide for this Yashica film camera, here
Yashica FX-1 Light Seals
USCamera 7 piece custom light seal kit for the Yashica FX-1 and FX-2 film cameras. This kit includes 2 door channel seals for the camera body, 1 camera body hinge seal, 1 latch plate seal on the back cover, 2 small back cover hinge side back cover channel seals and 1 custom cut mirror cushion like the original.
USCamera light seal placement guide for this model Yashica film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.