1964 Nikon F with 50 1.4
$68.00
USCamera made laser etched drawing onto MDF wood product of 1964ish Nikon F with Nikkor-S Nippon Kogaku 50 1.4. Meticulously drawn by hand then imported into the laser for etching. The image shown of the etching can’t show the details and sharpness of the drawing. The natural resins of the wood adds a unique shading to this drawing. I have etched many exploded views. Nothing has shown this much detail. I find it interesting every time I take a look. Once the drawing is finished, I apply a light coating of clear lacquer to seal the wood. A very unique and collectable item that should display beautifully anywhere. Please note. This a wood product, and like all wood, it may be a little different in color, density, texture, and may etch a little differently. It only makes each more unique. Therefore, though very similar, no two drawings will be exactly alike. This drawing measures approximately 12 x 19. Made in the USA by USCamera.
In stock
0
People watching this product now!
Description
1964 Nikon F with 50 1.4 Nippon Kogaku Nikkor S | Laser Etched Exploded View
USCamera | Vintage Parts | Foam Light Seals | Owner – Service – User Manual Downloads | Exploded Views | Laser Drawing
1964 Nikon F with 50 1.4 Nippon Kogaku Nikkor S | Laser Etched Exploded View
USCamera Free Monthly Download | Every Month | Always Free
We add new parts, also downloads, and light seals every day.
We have many vintage parts for Nikon film products.
Please review our parts available online though most of the vintage parts are not listed at this time.
Please contact us with any questions or part requests.
Display all of our Nikon parts online.
USCamera Online Since 1998
Service Parts for Cameras | Flash | Lenses | Tripods | Foam Light Seals | Exploded Views | Collectables
First of all, we have many part numbers in stock.
The most asked for parts include open cell foam sheets, light seal kits, Fresnel lenses, also lens mount screws, and lens mounts.
We also stock wind gears, pin faced screws, sync contacts, tripod feet, focus screens, screen frames, and lens FPCs. Just to name a few.
USCamera Since 1998 | Service Parts for Cameras, Flash, Lenses | Over 100 Light Seal Kits | Also Foam Sheets | Pentax Spotmatic Laser Etched Exploded View
We have AF S focus units, flash shoe feet, PC boards, SD card slots, focus rings, and guide plates.
Also, flash shoe cases, flash shoe contact pins, pin springs, rear covers, LCD windows, cover screws, and film advance base plates.
Plus, distance scale plates, clutch gears, zoom collars, lens tubes, thumb rests, grip tape, hand grips, SD card doors, and more.
We also make light seal kits for over 100 film cameras. Shop all light seal kits in stock.
Pentax Spotmatic Laser Etched Exploded View
We also make light seal kits for over 100 film cameras. Shop all light seal kits in stock.
Of course, we have photo grade foam sheets in stock. The exact same foam used in our light seal kits. You may see all of our foam sheets, cut strips, and all light seal kits in stock.
Lastly, Nikon continues to provide imaging tools for us.
Additional information
| Weight | 60 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Hasselblad Lens-Body Cocking Tool
Hex shaped cocking tool for Hasselblad. One end fits the cocking coupler on Hasselblad lenses and the other fits the slotted coupler visible from the back with the film back removed and the body released so the light baffles are in the raised position. This tool can allow you to easily cock the lens shutter that has released when removed it from a camera body. Also, you can attempt to partially cock a camera body that has jammed and attempt to remove the lens. Use of this tool has allowed the camera user to return their camera or lens to a usable condition. Caution and Extreme Care Required using this tool as you can do damage both to the body and lens internally. Remember you are using this tool on a precise instrument.
JIS Cross Point Screwdriver Bit #0-1.2mm x 40mm
USCamera premium quality screwdriver bit, JIS Phillips cross-point tip #0 1.2mm wide x 40mm long. JIS = Japan Industry Standard. Interchangeable tips are in stock. Made in Japan for USCamera. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
This is the screwdriver bit only. A lifetime handle with this #0 1.2x40 bit installed is available.
JIS Cross Point Screwdriver Bit #00-1.5mm x 40mm
USCamera premium quality screwdriver bit, JIS Phillips cross-point tip #00 1.5mm x 40mm long. JIS = Japan Industry Standard. Interchangeable tips are in stock. Made in Japan for USCamera. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
This is the screwdriver bit only. A new handle with this #00 1.5x40 bit installed, available here.
ROR – World’s Best Lens Cleaner
The best lens cleaner in the world. You can see the difference! One example. I have cleaned hundreds of my friends glasses. Everyone wants to know, immediately after putting their glasses on, what did I use on the lenses. Available in 1 ounce dropper bottles or 2 ounce spray bottles. "the difference is clear"
Use option to select 1 ounce "squeeze" bottle or 2 ounce spray bottle.
Rubber Lens Ring Tool – LT07
USCamera LT07 rubber lens tool. Measures 26mm long, 37mm and 30mm diameter with a 5mm wide contact surface and a 4.5mm recess. Rubber tools like these are invaluable when working on lenses and camera bodies. The surface friction allows you to easily remove stubborn name rings. Cleaning the contact surface with a ketone like Acetone or a cleaner like 409, can add additional friction. Made in the USA.
Rubber Lens Ring Tool – LT08
USCamera LT08 rubber lens tool. Measures 26mm long, 41mm and 33mm diameter with a 5mm wide contact surface and a 4.9mm recess. Rubber tools like these are invaluable when working on lenses and camera bodies. The surface friction allows you to easily remove stubborn name rings. Cleaning the contact surface with a ketone, Acetone or similar, can add additional friction. As these type of tools age, the contact area can be rejuvenated by a light sanding with a coarse grade of sandpaper on a flat surface. USCamera made in the USA
Reviews
There are no reviews yet.