Fujica ST901 Light Seals
USCamera custom light seal kit for the Fujica ST901 film cameras. This 10 piece custom USCamera foam kit includes lower/upper back cover channel seals, door hinge seal on the back cover, back cover latch plate seal, lower/upper latch plate seal on the camera body, lower/upper camera body channel seals, a replacement mirror cushion and the back cover film reminder window seal.
TECH NOTE. The channel seals on the camera body are not installed starting at the hinge end of the body, like many cameras. Lens mount facing down. For the ST901, these seals are carefully centered in the straight part of the body channels, before the channel turns downward. When installed properly, there will be little if any that seal material leftover. That is the factory install procedure. Also, the proper seals required there are shorter than you would imagine.
UScamera light seal placement guide for this Fujica film camera go here.
Fujica STX-1 Light Seals
USCamera custom light seals for the Fujica STx-1 and STX-1N. This custom kit includes 2 channel seals for the camera body. 1 door hinge seal on the back cover, lower/upper latch plate seals on the body, 1 back cover latch plate seal and 1 replacement mirror cushion. All seals have the adhesive applied.
USCamera light seal placement guide for this Fujica camera here.
Fujica STX-2 Light Seals
USCamera custom light seals for the Fujica STX-2. This custom 6 piece kit includes 2 channel seals for the camera body, 1 door hinge seal on the back cover, 1 back cover latch plate seal, 1 film reminder window seal, and 1 replacement mirror cushion. All seals have the adhesive applied.
USCamera light seal placement guide for this Fujica camera here. Coming soon.
Hasselblad #13067 Light Baffle
Hasselblad #22422 Light Baffle
Hasselblad #22828 Light Baffle
Kalimar K-90 Custom Light Seal Kit
This USCamera 6 piece custom light seal kit is made for the Kalimar K-90 35mm SLR film camera. The kit includes lower/upper channel seals on the body, mirror cushion, hinge seal on back cover, top channel seal hinge end and the latch plate seal, latch end on the back cover.
USCamera light seal placement guide for this Kalimar film camera, go here
Koni-Omega Film Back Light Seals
USCamera custom cut light seal kit for the Koni-Omega Rapid 120 and 220 film backs. When looking at the pressure plate, this 5-piece light seal kit includes the left channel L-shaped seal, right channel, upper channel, lower channel, and the special foam seal for the wind clutch housing channel. * Premium Black Open Cell Foam. Made in Japan.
*Removal of the original housing channel seal is not recommended.
The USCamera light seal placement guide for this kit is online.
Peeling the foam from the backing can be difficult for some. This video may help.
Koni-Omega Lens Mount Base Seal
USCamera custom cut mount base light seal for the Koni-Omega Rapid M, 100, and 200 camera bodies. You have to remove the lens mount to gain access to this seal. Premium Black Open Cell Foam. Made in Japan. The USCamera placement guide for this light seal is online, Coming Soon! Peeling the foam from the backing can be difficult for some. This video may help.
Konica Auto S3 Seals
This USCamera custom light seal kit fits the Konica Auto S3 rangefinder 35mm film cameras. All of the light seals used to seal the film chamber area of this camera are on the back cover. This 6 piece kit includes 1 back cover top channel seal, 1 back cover bottom channel seal, 1 back cover latch plate seal, 1 each top/bottom foam for film cassette spring and back cover hinge side seal.
USCamera light seal placement guide for the this Konica camera, go here
Konica Auto-S2 Light Seals
Konica AutoReflex A2 Seals
USCamera custom light seal kit fits the Konica AutoReflex A, A1000, A2, A3, T, T2, T3, and the T3n 35mm film cameras. The body casting used for these models is the same. This 5 piece foam seal kit includes lower/upper door channel seals for the camera body, camera body hinge seal, back cover door latch plate seal, and a mirror cushion.
USCamera light seal placement guide for this Konica, go here
