Nikon F4s Light Seals
USCamera custom light seal kit fits the Nikon F4 and F4s film cameras. This 7 piece light seal kit includes 2 door channel seals for the camera body, hinge end back cover seal, film reminder window seal, 2 back cover channel seals, and a mirror cushion.
USCamera light seal placement guide for this Nikon film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Leica R3 Light Seals
USCamera custom light seal kit fits the Leica R 3, and R 3MOT film cameras. This premium 5 piece kit includes 2 long channel seals on the body, 1 short upper back channel seal on the back cover, 1 door hinge seal on back cover and the film reminder window foam. Please note, the R 3 and R 3MOT do not use a foam mirror cushion.
USCamera light seal placement guide for this Leica film camera here. Coming soon!
Nikon Nikkormat Light Seals – PRO
USCamera custom light seal kit fits Nikkormat, Nikomat models including FT, FTn, and the FT2. The 6-piece pro kit includes 2 door channel seals on the camera body, 1 mirror cushion, 1 door hinge seal on the camera body, 1 eyepiece frame seal, and 1 meter window seal. Please note. The top cover must be removed to install the meter window seal and the eyepiece frame seal. Also, the finder frame seal is underneath the frame, so it must be removed to install that seal. Please Note. The meter window seal in this kit does not fit the FT3.
USCamera light seal placement guide for this Nikon Pro kit..... Coming Soon! Non pro kit here
Mamiya C330 S Pro Light Seals
USCamera custom light seal kit for the Mamiya C330 S Professional TLR camera bodies. This 6-piece kit includes the back door hinge seal, left/right channel seals on the back cover, top channel body seal, and the left/right channel seal for the camera body. A seal kit is also available separately for the C330 S Fresnel/viewfinder frame (requires dis-assembly to install). All light seals in this kit have the adhesive already applied. To install, just peel off the backing and press into place. Top Quality seals made of imported black open cell foam. We also make a kit for the other Mamiya C220/330 series models we have seen.
USCamera light seal placement guide for this Mamiya go here.
Helpful advice on lightseal remove and replace is always available.
Peeling the foam from the backing can be difficult for some. This video may help.
Vivitar XV Series Light Seal Kits
 USCamera custom light seal kit for the Vivitar XV-1, XV-2, XV-10, and the XV-20 film cameras. This 8 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals hinge end of the back cover, lower/upper special cut door channel seals latch end of the back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for XV series Vivitar film cameras coming soon.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Olympus XA3 XA4 Hinge Seal Foam
USCamera custom cut hinge seals for the Olympus XA3, and XA4 compact film camera. This seal fits on the body casting at the hinge end. Black open cell foam with the adhesive applied. Use option and select number of hinge seals required. This hinge seal will not fit the XA or XA2. For help with your light seal kit installation and removal. Peeling the foam from the backing can be difficult for some. This video may help.
Select options
This product has multiple variants. The options may be chosen on the product page
Light Seal Strips 3mm Thick – 230 Long
USCamera imported Black open cell foam cut strips with Adhesive. These strips are 3mm thick and 230 mm long. Made in Japan for USCamera. Please note. We can custom cut most any width and up to 400mm in length of the foam material we sell. Use option to choose cut strips 2.00mm, 2.25mm, 2.50mm, 2.75mm, or 3.00mm wide and 6 or 12 strips.
Select options
This product has multiple variants. The options may be chosen on the product page
Mamiya M645 Light Seals
USCamera custom light seal kit for the Mamiya M645 series of medium format SLR cameras. This includes the M645, M645J, M645 1000, and the M645 1000S. This 10-piece light seal kit is made of 2 kits. 4 pieces for the back cover, and 6 pieces for the body. First, is the back cover kit includes 1 upper channel seal, 1 lower channel seal, and the left/right channel seals on the back cover. 2nd would be the camera body kit and includes 1 door hinge seal, 1 upper channel latch plate seal, 1 left channel seal, 1 seal above the counter lever opening, and 1 short seal below the same lever. Then the overlay latch plate seal which placed over the 1st latch plate seal. With the exception of the overlay latch plate seal, all other seals have adhesive already applied. To install, just peel off the backing and press it into place. Top Quality kit using imported open cell foam. If you need the mirror cushion seal set, we also make a kit of perfectly cut pieces, in stock here. Please note. The image in this ad for the camera body seals shows the top overlay latch plate seal is shaped like a "C". That is actually a straight foam seal. It can easily fit any shape since it is soft foam. However, to get that photo of it shaped like "C", I used some clear wax you can't see in the image, to hold that shape for the picture.
The mirror foam for the M645 is a separate kit, available here.
USCamera light seal placement guide for this Mamiya film camera, Go here.
Removing and replacing light seal can be a challenge, our instructions can help you.
Mamiya RZ67 Back Seals
USCamera custom light seal kit for the Mamiya RZ 67 Professional 120 220 or 645 film back insert and shell. This 11 piece kit light seal kit includes 7 pieces for the insert and 4 piece for the shell. Premium imported USCamera foam.
Mamiya RZ film back placement guide, here.
Fuji GSW690II Light Seals
USCamera custom Light Seal Kit for the Fuji GW690 II and GSW690 II film cameras. This 6 piece light seal kit consists of 2 camera body door channel seals (top/bottom), 2 door channel seals for the back cover, 1 latch plate seal on the back cover and 1 back cover door hinge seal.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
USCamera light seal placement guide for this model Fuji here.
Canon AE1-Series Hinge Seals
USCamera custom hinge seals for the A1, AE1, AE1-P and AV1 camera bodies. 2 hinge seals are required per camera. This foam cushion has the adhesive already applied. To install, just peel off the backing and press into place. Foam made Japan for USCamera. Use option to select number of mirror cushions required. Light Seal Placement guide for this light seal kit, here. Removal and replacement help is always available online. Peeling the foam from the backing can be difficult for some. This video may help.
Select options
This product has multiple variants. The options may be chosen on the product page
Light Seal Strips 2mm Thick – 220 Long
USCamera imported Black open cell foam cut strips with adhesive. These strips are 2mm thick and 230 mm long. Made in Japan for USCamera. Use option to select width and 12 or 24 strips.
Select options
This product has multiple variants. The options may be chosen on the product page
