Showing 157–168 of 263 results

Petri-FT Light Seal Kit

Original price was: $8.00.Current price is: $7.92.
This USCamera custom light seal kit fits the Petri FT, FT II, FT 1000, and the Petriflex film cameras. This light seal kit includes 2 door channel seals on the camera body, 2 door channels seals on the back cover,  1 door hinge seal on the camera body and 1 replacement mirror cushion.   USCamera light seal placement guide for these Petri film camera models, go here.

Olympus XA1 Light Seals

$7.75
USCamera custom light seal kit for the Olympus XA1 compact 35mm film camera. This 5 piece camera seal kit includes 1 upper door channel seal for the camera body,  2 channel seals for  the back cover, 1 back cover door hinge seal and 1 latch plate seal on the back cover. USCamera light seal placement guide for this Olympus film camera Coming Soon!

Mamiya MSX500 Light Seals

$8.50
USCamera 6 piece custom light seal kit fits the Mamiya MSX 500 and MSX 1000 35mm film cameras. This light seal kit includes 2 door channel seals on the camera body, 1 door hinge seal on the back cover, upper/lower door channels back cover and a mirror cushion.   USCamera light seal placement guide for this Mamiya film camera here.

Light Seals Cut 220Lx1.50Wx1.0T-A

$8.80
USCamera imported photo grade open cell light seal foam cut strips.  These strips are 220 mm long x 1.50 mm wide x 1.0 mm thick with the adhesive applied. Package of 10 strips.

Light Seals Cut 220Lx1.40Wx1.0T-A

$8.80
USCamera imported photo grade open cell light seal foam cut strips.  These strips are 220 mm long x 1.40 mm wide x 1.0 mm thick with the adhesive applied. Package of 10 strips.

Light Seals Cut 220Lx1.40Wx1.5T-A

$8.80
USCamera imported photo grade open cell light seal foam cut strips.  These strips are 220 mm long x 1.40 mm wide x 1.5 mm thick with the adhesive applied. Package of 10 strips.

Light Seals Cut 220Lx5.00Wx3.0T-A

$5.64
USCamera imported photo grade open cell light seal foam cut strips.  These strips are 220 mm long x 5.00 mm wide x 3 mm thick with the adhesive applied. Package of 2 strips.

Maxxum 9000 Light Seals

$9.50
USCamera 10 piece custom light seal kit for the Minolta Maxxum 9000 film cameras. This light seal kit includes 2 door channel seals for the camera body, R/L mirror cushions, L/R side fresnel frame,  1 door hinge seal on the back cover, reminder window foam and 2 short seals on the back cover hinge end. Light Seal Placement guide for this Minolta light seal kit. Peeling the foam from the backing can be difficult for some. This video may help.

Pentax PC35AF Light Seals

$7.75
USCamera light seal kit will for the Pentax PC35AF compact 35mm camera. This kit includes lower channel seal, long upper long channel seal, short upper channel seal, and a body hinge seal. Please note, the channels are 1mm thick.  You must use an adhesive delay when placing them or you will have difficult time with the install. Also note, if you look carefully at the latch end of the body, you can see some anti-reflective material. It does not wear out and should not have to be replaced. Light seal placement guide for this seal kit, here.(coming soon) Peeling the foam from the backing can be difficult for some. This video may help. Foam installation and removal instructions always available online.

Olympus OMPC Light Seals

$8.00
This USCamera custom light seal kit will fit the Olympus OMPC film camera. This 8 piece seal kit includes lower/upper channel seals for the camera body, 1 camera body hinge seal, L/R mirror cushion, front fresnel frame seal, latch plate seal back cover latch end, and film reminder window seal.   USCamera light seal placement guide for this Olympus film camera here

Light Seals Cut 220Lx7.00Wx2.0T-A

$4.54
USCamera imported photo grade open cell light seal foam cut strips.  These strips are 220 mm long x 7.00 mm wide x 2 mm thick with the adhesive applied. Package of 2 strips.

Miranda Sensomat Light Seals

$7.50
This USCamera custom 5-piece light seal kit fits the Miranda models F, FM, Fv, FvT, G, GT, RE, and RE-II 35mm film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover.  All seals are machine cut for accuracy and the adhesive is already applied. To install, carefully peel adhesive form the backing and press into place. Premium quality seals made of imported open cell foam. USCamera light seal placement guide for this Miranda camera. Peeling the peeling adhesive from the backing can be difficult for some. This video may help. Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. They may not look healthy but they most likely are fine. We supply them to you, however, replace only if missing or damaged.