Ricoh XR Light Seals
USCamera custom light seal kit for the Ricoh XR1s, XR2, XR2s, XR6, XR7, XR10, XRS, Sears KR, KR10, KS Super, KSX Super, XR1000s and XR2000 film cameras. This 7 piece kit includes 2 door channels seals for the body, 2 channel seals for the back cover, 1 back cover hinge seal on the body, 1 back cover latch plate seal and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here
Olympus XA1 Light Seals
USCamera custom light seal kit for the Olympus XA1 compact 35mm film camera. This 5 piece camera seal kit includes 1 upper door channel seal for the camera body, 2 channel seals for the back cover, 1 back cover door hinge seal and 1 latch plate seal on the back cover.
USCamera light seal placement guide for this Olympus film camera Coming Soon!
Praktica Super TL-1000 Seals
USCamera custom light seal kit will fit the Praktica Super TL 1000 and Super TL3 35mm film cameras. This 6 piece camera seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover door hinge seal and 2 small lower/upper channel seals hinge end back cover.
USCamera light seal placement guide for this Praktica film camera here.
Olympus Pen S-D Light Seal
Pentax PC35AF Light Seals
USCamera light seal kit will for the Pentax PC35AF compact 35mm camera. This kit includes lower channel seal, long upper long channel seal, short upper channel seal, and a body hinge seal. Please note, the channels are 1mm thick. You must use an adhesive delay when placing them or you will have difficult time with the install. Also note, if you look carefully at the latch end of the body, you can see some anti-reflective material. It does not wear out and should not have to be replaced.
Light seal placement guide for this seal kit, here.(coming soon)
Peeling the foam from the backing can be difficult for some. This video may help.
Foam installation and removal instructions always available online.
Light Seal Strips 1mm Thick – 220 Long
USCamera imported Black open cell foam cut strips with Adhesive. These strips are 1mm thick and 220 mm long x 24 pieces. Made in Japan for USCamera. Please note. We can custom cut most any width and up to 400mm in length of the foam material we sell.
Use option to select cut strips 1.3mm, 1.4mm 1.5mm, 1.6mm, 1.7mm, 1.75mm, 1.9mm, 2.0mm, 2.25mm, and 2.50mm wide.
Select options
This product has multiple variants. The options may be chosen on the product page
Light Seal Strips 1.5mm Thick – 230 Long
USCamera imported Black open cell foam cut strips with adhesive. These strips are 1.5mm thick and 230 mm long. Made in Japan for USCamera. Please note. We can custom cut most any width and up to 400mm in length of the foam material we sell. Use option to select cut strips 1.3mm, 1.4mm 1.5mm, 1.6mm, 1.7mm, 1.75mm, 1.9mm, 2.0mm, 2.25mm, or 2.50mm wide and 12 or 24 pieces.
Select options
This product has multiple variants. The options may be chosen on the product page
Light Seals Cut 220Lx1.70Wx1.0T-A
Light Seals Cut 220Lx1.70Wx1.5T-A
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Canon FTb Light Seals Canon FTb Light Seals | FP | FX | TL
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, FP, FX, and TX film cameras. This 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
