Canon F1 New Mirror Cushions
USCamera custom mirror cushions for the F1 New camera bodies. These foam cushions have the adhesive already applied. To install you just peel off the backing and press into place.
Note. Which F1 do you have? The F1 New requires a 6 Volt battery to operate while the F1 Old cameras are made to use a 1.35 volt PX13 or 625 battery.
Use option to choose a quantity of 5 or 10 mirror cushions.
Canon Pellix Light Seals
USCamera custom light seal kit for the Canon Pellix film camera. This light seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal and a replacement focusing screen seal set of 4 pieces. We find it easier to install the seals surrounding the focusing 1 piece at a time. We also include foam replacements for the 4 felt type seals on the back cover. Though those seals may look in poor condition, most are fine. We only recommend replacing them if missing.
USCamera light seal placement guide for this Canon film camera here
Praktica Super TL-1000 Seals
USCamera custom light seal kit will fit the Praktica Super TL 1000 and Super TL3 35mm film cameras. This 6 piece camera seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover door hinge seal and 2 small lower/upper channel seals hinge end back cover.
USCamera light seal placement guide for this Praktica film camera here.
Pentax K1000 Mirror Cushion
Mamiya PD-Finder Light Seals
USCamera custom light seal for the Mamiya PD Prism Finder, and Prism Finders for the M645 series of medium format SLR cameras. This includes the M645, M645J, M645 1000, and the M645 1000S.
This 2-piece light seal kit includes 1 seal for the bottom of the finder, front. The other seal, also on the bottom of the finder, fits in front of the eyepiece frame.
TECH NOTE. These seals will help with a minor problem many of these prisms have, read. Coming Soon!
USCamera light seal placement guide for this PD Prism finder, look here. Coming Soon!
Konica C35-EF Light Seals
USCamera custom light seal kit fits the Konica C35 EF film cameras. This 4 piece light seal kit includes 2 door channel seals for the camera body, latch plate seal on the camera body, and the hinge seal on the back cover. Premium black open-cell foam. Made in Japan for USCamera
Light seal removing and installation help is always available.
Placement guide for this Konica camera. Coming Soon!
Removing the foam from the backing can be difficult for some. This video may help.
Miranda Sensorex Light Seals
USCamera 6 piece custom light seal kit for the Miranda Sensorex, Sensorex II and Sensorex EE 35mm film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover latch end, hinge seal back cover hinge end and a door hinge seal on the hinge end camera body. Premium quality seals made of imported open cell foam. Made in Japan.
USCamera light seal placement guide for this Miranda camera.
Peeling the peeling adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. They may not look healthy but they most likely are fine. We supply them to you, however, replace only if missing or damaged.
Light Seals Cut 220Lx1.30Wx1.5T-A
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera here
Cosina CT1 Light Seals
USCamera custom light seal kit fits the Cosina CT1 Super film cameras. The kit includes 2 door channel seals on the body, 2 door channel seals on the back cover (hinge end), 2 door channel seals on the back cover (latch end), 1 hinge seal on the camera body and 1 replacement mirror cushion. Premium USCamera foam made in Japan..
USCamera light seal kit placement guide for this Cosina film camera.
Peeling the foam from the backing can be difficult for some. This video may help.
Mamiya ZE Light Seals
USCamera 6 piece custom light seal kit fits the Mamiya ZE, ZE-2, and ZE-X film cameras. This light seal kit includes 2 door channel seals on the camera body, 1 door hinge seal camera body, upper/lower door channels back cover starting at the hinge end, and a mirror cushion.
USCamera placement guide for this Mamiya light seal.
Canon A-1 Light Baffle Mirror Cage
USCamera Canon A-1 mirror cage light baffle. This baffle sheet is on the inside of the mirror box on the left side. The anti-reflective sheet Canon used had a tendency to curl as it ages. This replacement part from USCamera is a special type of poly-urethane material that was used in many film cameras produced in the 1980's and later. Just a couple camera models where I can see this baffle material was used is Nikon N2000, N2020, and later used in the Minolta XE-7 as an updated replacement part. Black adhesive tape has already been applied so to install just, peel material from the backing to apply. I strongly recommend an adhesive delay so you have time to align the baffle in place. Material made in Japan for USCamera.
