Miranda Sensomat Light Seals
This USCamera custom 5-piece light seal kit fits the Miranda models F, FM, Fv, FvT, G, GT, RE, and RE-II 35mm film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. All seals are machine cut for accuracy and the adhesive is already applied. To install, carefully peel adhesive form the backing and press into place. Premium quality seals made of imported open cell foam.
USCamera light seal placement guide for this Miranda camera.
Peeling the peeling adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. They may not look healthy but they most likely are fine. We supply them to you, however, replace only if missing or damaged.
Miranda dx-3 Light Seals
USCamera custom light seal kit for the Miranda dx-3 35mm film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. Premium quality seals made of imported open cell foam Made in Japan.
Help with removal, and replacement of foam seals is always available online.
USCamera light seal placement guide for this Miranda camera.
Separating the adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have never seen these seals worn out. They may not look healthy but they are most likely fine. We supply them to you, however, replace only if missing or damaged.
Mamiya ZE Light Seals
USCamera 6 piece custom light seal kit fits the Mamiya ZE, ZE-2, ZE-X, and ZM film cameras. This light seal kit includes 2 door channel seals on the camera body, 1 door hinge seal camera body, upper/lower door channels back cover starting at the hinge end, and a mirror cushion.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
USCamera placement guide for this Mamiya light seal.
Contax 139Q Light Seals
USCamera custom light seal kit for the Contax 139 Quartz film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover door latch seal and 1 back cover door hinge seal.
Light Seal Placement guide for this foam seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Nikon F3 Mirror Cushions
USCamera custom cut mirror cushions for the Nikon F3, F3 HP film cameras. Package of mirror cushions with adhesive applied. Just peal off backing, and apply. Use the option to choose quantity of mirror cushions required. Help with removal, and replacement of foam seals is always available online. Peeling the foam from the backing can be difficult for some. This video may help.
Select options
This product has multiple variants. The options may be chosen on the product page
Nikon FE Mirror Cushions
USCamera custom cut mirror cushions for the Nikon FE FE2 FM FM2 FM2T film cameras. Just peel off the backing and apply. Premium Japanese USCamera foam. Use option to choose a quantity of mirror cushions desired.
Select options
This product has multiple variants. The options may be chosen on the product page
Konica SII Light Seals
USCamera custom light seal kit fits the Konica S II film cameras. This 3 piece light seal kit includes 2 door channel seals for the camera body and the hinge seal on the camera body. Also note: This kit is not correct for the Konica Auto SII.
USCamera light seal placement guide for this Konica film camera, go here.
Miranda Sensorex Light Seals
USCamera 6 piece custom light seal kit for the Miranda Sensorex, Sensorex II, and Sensorex EE 35mm film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover latch end, hinge seal back cover hinge end and a door hinge seal on the hinge end camera body. Premium quality seals made of imported open cell foam. USCamera foam is Made in Japan. Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. We supply replacements, however, replace only if missing or damaged.
Help with removal, and replacement of foam seals is always available online.
USCamera light seal placement guide for this Miranda camera.
Peeling the foam from the backing can be difficult for some. This video may help
Konica C35-EF Light Seals
USCamera custom light seal kit fits the Konica C35 EF film cameras. This 4 piece light seal kit includes 2 door channel seals for the camera body, latch plate seal on the camera body, and the hinge seal on the back cover. Premium black open-cell foam. Made in Japan for USCamera
Light seal removing and installation help is always available.
Placement guide for this Konica camera. Coming Soon!
Removing the foam from the backing can be difficult for some. This video may help.
Canon F1-Old Mirror Cushions
USCamera custom mirror cushions for the F1 New camera bodies. These foam cushions have the adhesive already applied. To install you just peel off the backing and press into place. Which F1 do you have? The F1 Old cameras are made to use a 1.35 volt PX13 or 625 battery for the meter to operate. The F1 New requires a 6 volt PX28 battery to power the shutter and meter. Foam Made in Japan for USCamera. Use option to choose a quantity mirror cushions needed.
Select options
This product has multiple variants. The options may be chosen on the product page
Canon F1 New Mirror Cushions
USCamera custom mirror cushions for the F1 New camera bodies. These foam cushions have the adhesive already applied. To install you just peel off the backing and press into place. Note. Which F1 do you have? The F1 New requires a 6 volt PX28 battery for the shutter operate at all speeds, and the meter to operate properly. While the F1 Old cameras are made to use a 1.35 volt PX13 or 625 battery for meter indication only. Use option to choose a quantity mirror cushions needed.
Select options
This product has multiple variants. The options may be chosen on the product page
Yashica Electro 35 GX Light Seals
USCamera custom light seal kit for the Yashica Electro 35 GX film cameras. This 4 piece custom cut foam kit includes lower/upper door channel seals on the back cover, back cover hinge seal, and the latch plate seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here. Coming Soon!!
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
