Minolta X700 Light Seals
USCamera custom light seal kit for the Minolta X300, X300x, X370, X370n, X370s, X370, X500, X570, X600, X7, X7a, X700, and X9 film cameras. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover. Please note that some cameras may use a film reminder window that requires foam, at this time we do not have a source for that seal, and is not included in this kit.
Please note this is an "N" kit for the X Series listed and updates the older cameras also. Adding the short top and bottom back cover channel seals, hinge end updates the camera. Minolta determined that under certain outside lighting conditions, the film perforations could be slightly fogged near the counter lever.
USCamera light seal placement guides for this Minolta film cameras here.Â
Installation and removal instructions always available online 24/7.
Minolta X700 Pro Pack-10
USCamera Minolta X-700 Pro pack-10 light seal package. This 64 piece package will seal 10 Minolta cameras like the X-7, X-7A, X-9, X-300, X-300s, X-300X, X-370, X-370n, X-370S, X-370X, X-500, X-570, X-600, X700XG, XG 1, XG 2, XG 9, XG-A, XG-E, XG-M, and XG-SE. This seal package includes,
Installation and removal instructions always available online 24/7.
USCamera light seal placement guide for these Minolta film cameras here.
- 24 lower or upper body channel seals(165mm L)
- 10 body hinge seals
- 10 mirror cushions
- 20 lower/upper channel seals, back cover, hinge end
Minolta XD Light Seals
USCamera custom made Light Seal Kit for the Minolta XD, XD-5, XD-7 and the XD11. This light seal kit consists of 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover.
USCamera light seal placement guide for the Minolta XD series film camera.
Minolta XE Light Seals
USCamera custom made light seal kit for the Minolta XE series film cameras. This seal kit consists of 2 door channel seals for the camera body, 1 door hinge seal on the camera body, 1 mirror cushion and 1 door hinge seal on the back cover.
USCamera placement guide for this Minolta light seal kit, here.
Minolta XG Light Seals
USCamera custom-made light seal kit for the Minolta XG Series film cameras both new and old-style including XG1, XG7, XG9, XGM, XG-A, XG SE, and more. New style cameras have the "world" logo in the letter "O" on the top cover's front nameplate. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, and 1 door hinge seal on the back cover. The "N" model update and addition to the old style XG's are the 2 small seals by the door hinge seal on the back cover.
Light Seal Placement guide for this Minolta light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Minolta XK Light Seals
USCamera custom light seal kit for the Minolta X-1, XK, and XM film cameras. This 8-piece light seal kit includes lower/upper door channel seals for the camera body, 1 door hinge seal on the body, left/right mirror cushions, lower/upper door channel seals for the back cover, and lastly 1 finder rest seal for the camera body.
Light Seal Placement guide for this Minolta light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Miranda dx-3 Light Seals
USCamera custom light seal kit for the Miranda dx-3 35mm film camera. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. Premium quality seals made of imported open cell foam Made in Japan.
USCamera light seal placement guide for this Miranda camera.
Peeling the peeling adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. They may not look healthy but they most likely are fine. We supply them to you, however, replace only if missing or damaged.
Miranda Sensomat Light Seals
This USCamera custom 5-piece light seal kit fits the Miranda models F, FM, Fv, FvT, G, GT, RE, and RE-II 35mm film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover by the door latch and 1 door hinge seal on the hinge end of the back cover. All seals are machine cut for accuracy and the adhesive is already applied. To install, carefully peel adhesive form the backing and press into place. Premium quality seals made of imported open cell foam.
USCamera light seal placement guide for this Miranda camera.
Peeling the peeling adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. They may not look healthy but they most likely are fine. We supply them to you, however, replace only if missing or damaged.
Miranda Sensorex Light Seals
USCamera 6 piece custom light seal kit for the Miranda Sensorex, Sensorex II and Sensorex EE 35mm film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 latch plate seal back cover latch end, hinge seal back cover hinge end and a door hinge seal on the hinge end camera body. Premium quality seals made of imported open cell foam. Made in Japan.
USCamera light seal placement guide for this Miranda camera.
Peeling the peeling adhesive from the backing can be difficult for some. This video may help.
Please note: On the back cover the original seals on the back cover are made of a felt type material. It is not necessary to replace these, we have not seen these seals worn out. They may not look healthy but they most likely are fine. We supply them to you, however, replace only if missing or damaged.
Nikkormat 31F3B-31 Eyepiece Frame Lightseal
Nikkormat 31F3B-T36 Meter Window Seal
USCamera top cover meter window seal for the Nikkormat and Nikomat FT, FTn,and the FT2. Package of 2 foam seals. USCamera foam is Made in Japan. The FT3 meter window seal is available here.
Use option to choose the number of window seals needed.
Nikkormat 31F3B-T36-1 Meter Window Seal
USCamera top cover meter window seal for the Nikkormat and Nikomat FT3 only. Package of 2 foam seals. USCamera foam is Made in Japan. The FT, FTn, and FT2 meter window seal is available here.
Use option to choose the number of window seals needed.
Nikon EM-FG Light Seals
USCamera custom light seal kit for the Nikon EM, FG, and FG 20 film cameras. This 8-piece light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 2 seals on each side of the focus screen frame (EM Only), 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover.
Placement guide for this Nikon light seal kit, go here.
Nikon EM-FG Mirror Cushion
Nikon F Light Seals
USCamera custom made light seal kit for the Nikon F film camera. This light seal kit consists of 1 replacement mirror cushion and 1 prism cushion. The door channel seals in this camera are made of a photo-grade wool blend and rarely, if ever, needs replacement. USCamera Foam Made in Japan.
Foam removal and replacement help is always available online.
USCamera light seal kit placement guide for this Nikon film camera, here. (coming soon).
Peeling the foam from the backing can be difficult for some. This video may help.
Nikon F2 Light Seals
USCamera custom light seal kits for the Nikon F2 film cameras. The F2 may be known by a few designations due to the meter attached. F2S, F2 Photomic, etc.
We stock 5 and 9 piece foam kits for this Nikon model.
The 5 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, 1 finder rest that cushions the back of the viewfinder when mounted on the camera body, and the seal on the back cover by the door latch.
The 9 piece kit includes everything from the 5 piece kit Plus the left/right foam seals just behind the mirror cushion. Also the 2 foam seals used on the bottom of the DP view finders, left and right of the serial # plate. Those seals prevent the left and right covers screws from marring the bottom of the finder. Please note. I have owned F2 bodies that used a felt type seal by the door latch. I do not recommend replacing that seal with foam.
Use option to select quantity and 5-piece or 9-piece light seal kits.
USCamera light seal placement guide Nikon F2 camera 5-piece kit, go here.
USCamera light seal placement guide Nikon F2 camera 9-piece kit, go here. Soon!
Nikon F3 Mirror Cushions
Nikon F3HP Light Seals
USCamera custom light seal kit fits the Nikon F3 / F3 HP film cameras. This kit includes 2 door channel seals for the camera body, mirror cushion and the door hinge seal on the back cover. Please note that this Nikon model does not use a foam door hinge light seal. The door hinge seal is made of a felt type material and does not need to be replaced. We have included the hinge seal should that seal be missing or damaged on your camera.
USCamera light seal placement guide for this Nikon, go here
Nikon F4s Light Seals
USCamera custom light seal kit fits the Nikon F4 and F4s film cameras. This 7 piece light seal kit includes 2 door channel seals for the camera body, hinge end back cover seal, film reminder window seal, 2 back cover channel seals, and a mirror cushion.
USCamera light seal placement guide for this Nikon. Go here
Nikon FA Light Seals
USCamera custom light seal kit fits the Nikon FA film camera. This light seal kit includes 2 door channel seals, the door hinge seal, and a replacement mirror cushion.
USCamera light seal placement guide for this Nikon film camera here.
Nikon FE FM Hinge Seal Foam
Nikon FE FM Light Seals
USCamera custom light seal kit for the Nikon FE FE2 FM FM2 FM2n FM2T film cameras. This USCamera custom kit includes lower/upper door channel seals for the camera body, 1 door hinge seal for the camera body, and 1 mirror cushion. Premium foam made in Japan. This Nikon kit is currently buy 2 get 1 free, no limit.
Use option to select 1 or more light seal kits.
Information guide for removing/replacing foam seals is always available.
Light seal placement guide for the Nikon FE FM film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Nikon FE FM Mirror Cushions – Non Adhesive
USCamera custom cut mirror cushions for the Nikon FE, FE2, FM, FM2, and FM2T film cameras. These are the custom cut foam pieces like non-adhesive cushions Nikon sold. These pieces basically measure 38.5L x 2.25Wx 2T in mm. Package of 10 mirror cushions.
This foam must be glued down with quality contact cement like Pliobond. Custom Cut Premium Imported USCamera foam. Made in Japan.
