Nikon Nikkormat Light Seals
USCamera custom light seal kit fits Nikkormat-Nikomat models including FS, FT, FTn, FT2, and the FT3. The kit includes 2 door channel seals on the camera body, 1 mirror cushion and 1 door hinge seal on the camera body. USCamera Foam Made in Japan.
USCamera light seal placement guide for this Nikon camera, go here
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Canon FTb Light Seals
USCamera custom light seal kit f0r the Canon FT, FTb, FTb QL, and TX film cameras. Th 4 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal, and 1 replacement mirror cushion. All seals have adhesive already applied. To install just peel off the paper backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described.
If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit, go here.
USCamera light seal placement guide for the Pentax MX mirror cushion kit, go here.
Mamiya RB67 Mirror Seals
USCamera custom mirror seal kit for Mamiya RB67, RB67 Pro S and RB67 Pro SD camera body. This seal kit includes the seals on each side of the mirror, 2 mirror damper cushions on the top inside mirror cage frame and 1 mirror baffle seal on the back of the mirror frame.
Light seal removal and installation help is always available.
Placement guide for this kit is available here. Coming Soon!
Mamiya RB Back Insert Seals
USCamera custom 6 piece light seal kit for the Mamiya RB 67 Pro / Pro S 120, 220 and 645 film-back inserts only. This 1/2 of what I recommend you replace. The other 1/2 is the shell kit
The RB film back consists of the shell and insert. In checking film backs for years, if the shell seals are bad so are the insert seals, for that reason, I recommend replacing them as a set. You may purchase the complete film back kit here.
The insert kit includes door channel seals on the back of the top and bottom covers, top/bottom seals left guide roller plate and top/bottom seals right guide roller plate.
Make sure to check out the placement guide for the RB Pro and Pro S film back insert, and shell here.
Canon F1 Light Seals
This USCamera custom light seal kit fits the Canon F1, and F1n Old. This old style F1 or F1n uses a 1.35-volt button cell battery for the meter. The kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. All seals have adhesive already applied and to install you just peel off the backing and press into place. The F1n New light seal kit is available here.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Minolta XD Light Seals
USCamera custom made Light Seal Kit for the Minolta XD, XD-5, XD-7 and the XD11. This light seal kit consists of 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover.
USCamera light seal placement guide for the Minolta XD series film camera.
Light Seal Foam Sheet 2mm w/ Adhesive
Olympus XA2 Light Seals
USCamera custom light seal kit will fit the Olympus XA2 compact film camera. Only fits the model listed. This seal kit includes 2 door channel seals for the camera body, 2 door channel seals on the back cover, 1 back cover door hinge seal and 1 door latch plate seal on the back cover.
USCamera light seal placement guide for this Olympus camera, go here.
Yashica YashicaMat Light Seals
USCamera custom light seal replacement kit for all Yashica YashicaMat camera bodies. This 5 piece kit includes 4 back cover seals and 1 meter housing seal.
Please note. Though this seal kit is cut for the 124G, it fits every Yashica Model we have seen that uses seals on the back cover. Some older YashicaMat cameras may not use a seal at the door hinge. If that is the case with your camera, you do not want to add foam there.
USCamera light seal kit placement guide available here.
Mamiya RB Back Shell Seals
This USCamera custom seal kit will service one RB 67, RB 67 Pro, Pro S 120, 220, and 645 film back shell. This 1/2 of what I recommend you replace. The other 1/2 is the insert kit
The RB film back consists of the shell and insert. In checking film backs for years, if the shell seals are bad so are the insert seals. I recommend replacing them as a set. You may purchase the complete film back kit here.
This is the shell kit only and includes 2 door channel seals on the back cover, 1 back cover hinge seal and 1 back cover door latch seal.
USCamera RB 67 film back placement guide will help with installing the shell kits. Look here
