Light Seal Placement Guides

USCamera Light Seal Placement Guide | Yashica FX-D Quartz

Posted by author-avatar
On August 22, 2018
0 comments

USCamera Light Seal Placement Guide | Yashica FX-D Quartz

Custom Light seals for Yashica Film Cameras
Yashica FX-D Quartz
Also New and used Yashica film camera parts from USCamera

Please Contact us for any questions you may have. New light seal kits and parts are added every day

Top Quality kits using imported open cell foam

Do you want to make your own light seal kit? Maybe you have a special film camera accessory that requires a special size of the light seal material.  We can help.

Also, some customers find sheet foam is the best solution. We have foam material in a thickness of 1mm, 1.5mm, 2mm, 3mm, and 4mm available here.

In addition, we have many different strips of light seal material already cut to width and 220 mm long here.

For help installing light seal kits please go here.  Following the link to that short read can improve the quality of your light seal installation.

USCamera light seal kit placement guides can really help.

Especially if the old light seals have already been removed before you acquired the camera. go here

See all USCamera Light seal kits available for Yashica

“Furthermore, the most important and time-consuming work is removing the old seals. Focus on clean and then clean more. You will to spotlessly remove all the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals. Also, the finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Lastly, a proper installation will give you thousands of light tight exposures.”

Yashica cameras were made by Kyocera Japan. Also, though no longer making film cameras, always innovating, check them out here

This 5 piece custom light seal kit includes,

bottom channel seal, camera body – 1 x 1mm
top channel seal, camera body – 1 x 1mm
hinge seal, camera body – 1 x 3mm
latch plate seal – 1 x 3mm
mirror cushion – 1 x 3mm

 

USCamera Light Seal Placement Guide | Yashica FX-D Quartz

In addition, see all USCamera light seal kits for Yashica and more, start here.

USCamera | Thousands of parts for cameras, flash, lens, light seals, foam sheets, downloads + more | USCamera Light Seal Placement Guide | Yashica FX-D

author-avatar

About Gray

As a veteran attending National Camera's resident camera repair school in 1979, is where I found my true calling for the demanding yet extremely interesting field of photo equipment service and sales. For 25 years we grew every year. The staff and I serviced tens of thousands of film camera items, trained many technicians, met thousands of wonderful customers and truly had a fantastic time. Within 2 years of 2004, my service experience was devalued somewhat by the internet, film camera sales/service flatlined. Camera stores 50 times larger than mine were closing. I could see a new opportunity on the Internet. USCamera started as information site then became a family run internet business. Our mission remains the same, • Specialize in Vintage film equipment, mostly after 1958 • Knowledgeable • Provide quality products • Superior Service • Always available via phone - contact form – email All of us at USCamera look forward to serving you. Gray USCamera.com

Newer USCamera Light Seal Placement Guide | Vivitar V3000s
Back to list
Older Yashica FX1 FX2 Placement Guide

Leave a Reply

Your email address will not be published. Required fields are marked *