Miranda Sensomat Light Seal Placement Guide
Miranda Sensomat Light Seal Placement Guide
Before doing anything, please go here. The information provided will improve the quality of your light seal kit installation.
Miranda Sensomat Light Seal Placement Guide
For more information on purchasing this kit, go here
You are installing a 5 piece custom light seal kit for the Miranda Sensomat.
In addition, this kit also fits the Sensomat models F, FM Fv, FvT, G, GT, RE, RS, and RE-II.
Next you will need take all of the seals out of the kit and lay them out on your work area. This kit includes,
Lower door channel seals, camera body – 1 x 1mm
Upper door channel seals, camera body – 1 x 1mm
Hinge seal, hinge end back cover – 1 x 2mm
Latch Plate seal, latch end back cover – 1 x 2mm
Mirror Cushion – 1 x 2mm
The most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Proper installation will give you thousands of light tight exposures.
USCamera | Thousands of parts for cameras, flash, lens, light seals, foam sheets, downloads + more
Lastly, always made to inspire…see New film camera products.
Is there any compatibility with the Miranda TM with this kit?
Thanks for contacting me.
I researched your TM camera. It is based on the body casting of the RE.
Manufacturers do not like to change the body castings unless absolutely necessary.
This kit should work for you https://uscamera.com/product/miranda-sensomat-light-seals/
If you find your TM needs other foam pieces, let me know.