USCamera Light Seal Placement Guide | Argus Cosina CT1 Super
Before doing anything, please go here
For more information on purchasing this kit, go here
You are installing a foam kit kit for the Argus Cosina CT1 Super
This 8 piece USCamera light seal kit includes,
Back cover, latch end, Bottom channel seal – 1 x 2mm
Back cover, latch end, Top channel seal – 1 x 2mm
Channel seal Bottom, camera body – 1 x 1mm
Channel seal Top , camera body – 1 x 1mm
Hinge end, back cover, top/bottom channel seal – 2 x 2mm
Hinge seal, camera body – 1 x 1mm
Mirror cushion – 1 x 1mm
General Installation Guidelines
Hinge Seal, camera body. Install this seal centering it between the top and bottom door channels.
Channel seals, camera body. Install the upper and lower camera body channel seals starting at the hinge side on the camera body, working from right to left. The upper channel has the counter actuation lever. You will need to install this seal as close to each side of the counter lever opening as possible, cutting the seal as required.
Channel seals, hinge side back cover. Install these upper and lower back cover channel seals starting at the hinge side on the camera body, working from left to right.
Channel seals, latch side back cover. Install these upper and lower back cover channel seals starting at the hinge side flush with the edge of the back cover, working from right to left. See the image below.
Mirror Cushion. Carefully install the mirror cushion.
The most important and time-consuming work is removing the old seals. Focus on clean, clean, clean. Clean the old residue from the door channels, mirror cushion area, door hinge area and anywhere else you are replacing the seals. The finest adhesive in the world will not adhere to that sticky, gooey residue that was once a quality light seal. Proper installation will give you thousands of light tight exposures.
See all USCamera light seal kits for Cosina and more, start here.
USCamera | Thousands of parts for cameras, flash, lens, light seals, foam sheets, downloads + more | USCamera Light Seal Placement Guide | Argus Cosina CT1 Super