303 221 2394


  • Vivitar 220SL 450SL Custom Light Seal Kit

Vivitar 220SL 450SL Custom Light Seal Kit

USCamera custom light seal kit for the Vivitar 220SL 450SL film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body.  All seals have the adhesive already applied.  Just peel off the backing and press into place.  Tech Note: On the back cover, door latch end, upper / lower channels, you will notice 2 small felt seal strips.  It is not necessary to replace those, they do not wear out.

In stock (can be backordered)

  • Description
  • Additional information
  • Reviews (0)


Vivitar 220SL 450SL Custom Light Seal Kit

USCamera Custom Light seals Vivitar Film Cameras
We have hundreds of new and thousands of used Vivitar film camera and flash parts.

Please Contact us for any questions you may have. New light seal kits and parts are added every day from customer requests.
Our kits use photo quality imported open cell foam.
For help installing light seal kits go here.
USCamera Light seal kits available for Vivitar film cameras

USCamera Light Seal Installation Guide  – Vivitar 220SL 450SL 

Before you do anything, please read general instructions on removing and installing light seals here.

Next, take all of the seals out of the kit and lay them out on your work area. This kit includes,

2 x 1mm – back cover channel seals, camera body
1 x 3mm – back cover latch seal, back cover
1 x 2mm – hinge seal, camera body
1 x 2mm – mirror cushion

Tech Note. It is easier to install the back cover hinge seal and work on the back cover with it removed from the camera (but not necessary).  It is difficult to remove the hinge pin, so you will need to carefully lift up the front grip side leatherette near the hinge it will expose the 3 back cover retaining screws. If the leatherette is very brittle and breaks into pieces when attempting to lift it up, it is best leave the film back attached to the camera.

Hinge Seal, camera body. Install this seal centering it between the top and bottom door channels.

Latch plate seal, back cover. Notice a inside lip on the door latch plate by the film cassette spring. Install by centering this seal on that lip.

Door channel seals, camera body. Install the upper and lower camera body channel seals starting at the hinge side of the camera body, working from right to left. The upper channel has the counter actuation lever. You will need to install this seal as close to each side of the counter lever opening as possible.

Mirror cushion.  Now, with the utmost care, remove the old and install the new mirror cushion.  Remember if any thing touches the focusing screen, it will likely be permanently damaged.

Vivitar 220SL 450SL Custom Light Seal Kit

Additional information

Weight 1 oz


There are no reviews yet. Add a review

Welcome to USCamera. Our imaging parts and information superstore. New product added everyday. Need something not listed? Email us with your request. Dismiss