Name: Light Seals Cut 220Lx1.75Wx3.0T-A
SKU: LS-STWA220-1.75-3.0 (3)
Price: 5.46 USD
Availability: InStock

Light Seals Cut 220Lx1.75Wx3.0T-A

$5.46

USCamera imported photo grade open cell light seal foam cut strips. These strips are 220 mm long x 1.75 mm wide x 3 mm thick with the adhesive applied. Package of 3 strips.

In stock

Compare

0 People watching this product now!

Light Seals Cut 220Lx2.25Wx3.0T-A | Premium Open Cell Foam | USCamera

USCamera | Imported Light Seal Strips Cut with Adhesive
Light Seals Cut 220Lx1.75Wx3.0T-A | Premium Open Cell Foam | USCamera
Photographic Grade Foam Light Seals

A – in the listing = foam with adhesive applied
NA – in the listing = foam No adhesive applied

Before doing anything, I recommend reading about removing and replacing light seals here.

USCamera Free Monthly Download | Every Month | Always Free | Go here.

USCamera stocks premium light seal foam sheets, also strips and kits with the adhesive applied or without.

We add new parts, light seals and also downloads to our almost every day.

First of all, we import all of our light material which is photographic grade open cell foam.

This product is listed as Light Seals Cut 220Lx1.75Wx3.0T-A

We also make and stock over 90 light seal kits for many camera models. See all kits, Start here.

USCamera Online Since 1998

Light Seal Kits | Foam Sheets | Pre-Strips | Genuine Parts | Digital | Flash | Lenses | Vintage Film Cameras

USCamera light seal kits also start with precise measurements taken from the actual make and model of the equipment.

We do not sell kits that supply you with a couple of pre-cut pieces which would be easily cut. Then supply you with material which will require you to learn how to accurately hand cut body and back cover channel seals. These seals average 1.3mm – 2mm wide and average 165mm long. Believe me, it takes a lot of practice to accurately cut seals like those.

Light Seals Cut 220Lx1.75Wx3.0T-A | Foam Seal Strips-Bulk Sheets | Premium Open Cell Foam Lasts Years | Same High-Quality Original Japanese Foam | USCamera

Also, you will need to learn how to clean the old seals from your camera. If you need help with that, go here.

Additionally, you may have to cut a short piece from a body channel seal to clear the counter lever opening.

Some cameras use fabric or leather type pieces of material on the back cover or the body, usually at the latch end. We also try and note that info in the light seal placement guides. Most of the time you do not want to remove those pieces. For the most part, they do not wear out. I have serviced cameras that have seen 5000 rolls plus and they are holding up.

Furthermore, USCamera placement guides can really help you if all the light seals have been removed before you acquired the equipment. See all available USCamera light seal placement guides. Go here.