Back to products
Manfrotto R1036,99 Screw Set
Price range: $6.57 through $18.64
Canon F1-Old Mirror Cushions
Price range: $7.50 through $49.00
USCamera custom mirror cushions for the F1 New camera bodies. These foam cushions have the adhesive already applied. To install you just peel off the backing and press into place. Which F1 do you have? The F1 Old cameras are made to use a 1.35 volt PX13 or 625 battery for the meter to operate. The F1 New requires a 6 volt PX28 battery to power the shutter and meter. Foam Made in Japan for USCamera. Use option to choose a quantity mirror cushions needed.
0
People watching this product now!
Description
Canon F1-Old Mirror Cushions | 35mm Film Cameras
USCamera | Custom Light Seals Canon
Canon F1-Old Mirror Cushions | USCamera Foam
New/Used Canon Film Camera Parts
USCamera Free Monthly Download | Every Month | Always Free
Please contact us with any questions you may have. We add new parts, also manuals, and light seals are added almost every day.
See all USCamera Light seal kits for Canon.
Please contact us with any questions or requests.
USCamera Kits Start with Premium Open Cell Foam | Canon F1-Old Mirror Cushions
Do you want to make your own light seal kit? Maybe you have an accessory that needs light seal foam. We can help with that also.
Many times sheet foam is best. We have foam in 1mm, 1.5mm, 2mm, 3mm, and 4mm thickness in stock.
We have many foam strips already cut to width and 220 mm long.
USCamera Online Since 1998
Genuine Parts for Cameras | Flash | Lenses | Light Seal Kits | Foam Sheets | Vintage Parts for Film Cameras
USCamera Since 1998 | Service Parts for Cameras, Speedlite, Lenses | Also Light Seals, Foam Sheets | Service Manuals Part Lists | Canon F1-Old Mirror Cushions | 35mm SLR Cameras
For help with your light seal kit installation and removal. Also, following the link to a short read can improve the quality of your light seal install.
USCamera light seal kit placement guides can help you if the old light seals have been removed.
Light seal placement guide for the Canon AE-1 film camera.
We also makes light seal kits for over 100 film cameras. See all USCamera light seal kits for Canon cameras.
Canon F1-Old Mirror Cushions
Of course, we have photo-grade foam, the same foam used in our light seal kits. Shop all cut strips, foam sheets, and light seal kits in stock.
First of all, the most important work you have to do is to remove the old seals. Focus on clean, clean, clean.
Make sure to remove all traces of the old door channel seals, mirror cushion, also door hinge foam, and anywhere else you are replacing old seals.
The finest adhesive in the world will not adhere to that sticky goo that was once a light seal.
Finally, a proper install will give you thousands of light tight exposures.
Same High-Quality Japanese Foam As Original | Canon Film Cameras | USCamera Foam
Lastly, made to inspire, see the new Canon products.
Additional information
| Weight | 1 oz |
|---|
Reviews (0)
Shipping & Delivery
Related products
Canon F1n Light Seals
USCamera custom Canon F1n (new) light seal kit includes 2 door channel seals, door hinge seal, and a replacement mirror cushion. The F1n New uses a 6-volt battery and has an A setting on the speed dial. All seals have adhesive already applied and to install, just peel off the backing and press into place.
Help with removal, and replacement of foam seals is always available online
Light Seal Placement guide for this light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax 67 Seal Kit
USCamera custom light seal kit for the Pentax 67 film cameras. This 8 piece custom seal kit consists of 3 door channel seals on the camera body, 1 back cover hinge seal, 2 back cover door channel seal, 1 camera body door latch seal, and 1 replacement mirror cushion. USCamera light seal placement guide for this Pentax film camera here.
Pentax ME-Super Lightseals
USCamera custom light seal kit for the Pentax ME, ME Super, MG, MV, and the MV-1 film cameras. This kit includes 2 door channels seals for the camera body, a special cut mirror cushion, and the door hinge seal on the camera body. The original hinge seal is made of felt and does not require replacement. In response to many customer requests who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. This kit is custom cut by USCamera and uses adhesive backed, black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax film camera here.
Pentax MX Light Seals
This USCamera 10 piece custom light seal set will fit all of the Pentax MX cameras. We break this kit installation into 2 different kits. 1 x 5 piece kit for the camera film compartment area and 1 x 5 piece kit for the mirror cushion area. Both kits are included in this sale as pictured, and described. If you only want the mirror cushion kit, go here.
USCamera light seal placement guide for the Pentax MX body kit.
USCamera light seal placement guide for the Pentax MX mirror cushion kit.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax Super Program Light Seals
USCamera custom light seal kit for the Pentax Super Program, Super A, Program Plus, Program A film cameras. The body casting for these models is the same. This 5 piece kit includes 2 door channels seals for the camera body, special cut mirror cushion, back cover hinge end top channel seal, and the hinge seal on the camera body. The original hinge seal is made of type of material that does not require replacement. I do not recommend removing the original seal and. In response to many requests from customers who have purchased cameras where the door hinge seal was already removed, we now include the foam door hinge seal. All seals have the adhesive installed. Just remove the backing from the foam and install. This kit is custom cut by USCamera and uses adhesive backed black open cell foam imported from Japan.
USCamera light seal placement guide for this Pentax light seal go here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Ricoh KR-5 Light Seals
USCamera custom light seal kit for the Ricoh KR5, KR5 Super film cameras. This custom 5 piece kit includes 2 door channel seals for the camera body, 1 door hinge seal on the back cover, 1 seal on the door latch plate on the back cover, door hinge seal on the camera body and 1 mirror cushion.
Light seal placement guide for this USCamera Ricoh kit, go here (coming soon)
Vivitar 220/SL Light Seals
USCamera custom light seal kit for the Vivitar 220/SL, 250/SL, 400/SL, 420/SL, and the 450/SLD film cameras. This kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 back cover seal door latch end and 1 door hinge seal on the camera body. All seals have the adhesive already applied. Just peel off the backing and press into place.
USCamera light seal placement guide for this Vivitar film camera.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Yashica Electro-35 Light Seals
USCamera 6 piece custom light seal kit for the Yashica Electro 35 Series including the G, GS, GT, GSN, and GTN. This seal kit includes 2 door channel seals on the body, back cover door latch seal, 2 short channel seals on back cover latch end and 1 hinge seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here.
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Reviews
There are no reviews yet.