Filter Wrench Set – Extra Small
USCamera Filter Wrench Set - Extra Small. Fits filters, lens groups, and more. This set includes 2 tools. One fits rings 31 to 37mm, and the other 42 - 46mm. Made of spring steel, with a heavy duty non-marring rubber covering. Made in the Japan. Please note, dented filters cannot be removed until the dent is straightened.
Filter Wrench Set – Small
USCamera Filter Wrench Set - Small. Fits filters, lens groups, and more. This set includes 2 tools. One fits rings 48 to 55mm, and the other 58 - 62mm. Made of spring steel, with a heavy duty non-marring rubber covering. Made in the Japan. Please note, dented filters cannot be removed until the dent is straightened.
Filter Wrench Set – Large
USCamera Filter Wrench Set - Large. Fits filters, lens groups, and more. This set includes 2 tools. One fits rings 67 to 72mm, and the other 77 - 82mm. Made of spring steel, with a heavy duty non-marring rubber covering. Made in the Japan. Please note, dented filters cannot be removed until the dent is straightened.
JIS Cross Point Screwdriver #0-2.0mm x 40mm
USCamera quality screwdriver handle with a JCIS Phillips cross-point tip 2.0mm W x 40mm L installed. The 2.0 tip is the most common size used in photo equipment service. Made in Japan for USCamera. Additional tips are available. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
JIS Cross Point Screwdriver #00-1.5mm x 40mm
USCamera quality screwdriver handle with a JIS cross-point tip #00 1.5mm x 40mm long. Interchangeable tips are in stock. Made in Japan for USCamera. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
JIS Cross Point Screwdriver #0 2.5mm x 120mm
USCamera quality screwdriver handle with a JIS Phillips cross-point tip #0 2.5mm W x 120mm L installed. Made in Japan for USCamera. Additional tips are available. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
JIS Cross Point Screwdriver #0 1.2mm x 40mm
USCamera quality screwdriver handle with a JIS Phillips cross-point tip #0 1.2mm W x 40mm L installed. Made in Japan for USCamera. Additional tips are available. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
JIS Cross Point Screwdriver #00 1.5mm x 80mm
USCamera quality screwdriver handle with a JIS Phillips cross-point tip #00 1.5mm W x 80mm L installed. Made in Japan for USCamera. Additional tips are available. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
JIS Cross Point Screwdriver #0 2.5mm x 40mm
USCamera quality screwdriver handle with a JIS Phillips cross-point tip #0 2.5mm W x 40mm L installed. Made in Japan for USCamera. Additional tips are available. Tech Note Please do not damage the screws on your photo equipment. Screws used on Japanese cameras and photo gear are not the same screws used anywhere else. The face of the screw (the drive) is shaped a little differently and they require a different type of screwdriver tip that fits screw drive correctly.
Lens Element Sucker Tool
Premium quality lens element removal tool kit. This kit includes suction bulb, short tube 33mm, long tube 95mm, 2 pieces 20mm suction cap, and 2 pieces 4.80mm suction cap. Not made for use with water. Made by UN of Japan. As the name states it is a sucker(suction) tool. Made for removing lens elements from group or element housings. When used carefully, I was able to hold, remove and place large elements, 65mm diameter and smaller. It is a high-quality tool and lasts for years. I know because I purchased one of these tools from Vivitar in 1978 and I still use it today. Some of the pics in this ad are of the old box and tools.
Please Note. The is tool is not made to remove elements by twisting the tool in the hope of turning the element in place.
Spanner Wrench – Double Bar
USCamera double bar spanner wrench can be used for servicing cameras, lenses, and other fine instruments. Double bar support for easier use. Quality stainless steel construction. This tool includes 3 sets of interchangeable tips as shown. When using the pointed tips, the working distance is 11mm - 115mm. The slotted tips are 2.6mm, and 5mm wide. The Double Bar spanner is assembled in the image shown. This 22 piece stainless steel spanner wrench set includes 2 - bars, 6 - knurled screws, 2 - pointed tips, 2 - half-slot tips, and 2 - full-slot tips. The tool kit includes 2 - allen wrenches, 2 - set screws, and 4 allen head screws that can be used replace the knurled lock screws already installed. Made by USCamera China.
1964 Nikon F with 50 1.4
USCamera made laser etched drawing onto MDF wood product of 1964ish Nikon F with Nikkor-S Nippon Kogaku 50 1.4. Meticulously drawn by hand then imported into the laser for etching. The image shown of the etching can't show the details and sharpness of the drawing. The natural resins of the wood adds a unique shading to this drawing. I have etched many exploded views. Nothing has shown this much detail. I find it interesting every time I take a look. Once the drawing is finished, I apply a light coating of clear lacquer to seal the wood. A very unique and collectable item that should display beautifully anywhere. Please note. This a wood product, and like all wood, it may be a little different in color, density, texture, and may etch a little differently. It only makes each more unique. Therefore, though very similar, no two drawings will be exactly alike. This drawing measures approximately 12 x 19. Made in the USA by USCamera.
