Genuine Pentax film camera parts for SLR camera, motor drives and compact camera parts including 110 parts.
Pentax 23102-1020 Latch Lever Spring
Pentax Accessory Shoe
Pentax 30753 Correction Lens Adapter
Pentax 24101-O-I110 Battery Holder
Pentax 24101-A313 X Contact Cap
Pentax 23102-3020 Counter Dial
Pentax 23102-8050 Self Timer Lever Retainer Screw
Pentax 23102-5091 Speed Dial Retainer Screw
Pentax 23102-5044 Speed Dial
Canon XA1-4170-256 Screws
Canon XA9-1392 Screws
Pentax 23701-L3-01 Ground Glass
Genuine Pentax ground glass split image condenser lens for the K1000 Old, KM, KX, Spotmatic, SP500, SP, SP1000, SP II, and the SP IIa film cameras. Last sold by Pentax as part number 23701-L3-01. Also fits Spotmatic cameras though was never installed and sold on that model when new.
Please note, the old style focusing screen system in the models listed above, use 2 parts that make up the focusing system. The ground glass on top and the Fresnel lens below the ground glass. The Fresnel lens is plastic and damages very easily. Made by Pentax Japan.
Pentax 77651-A0210 SD Card Cover
Pentax 23102-03006 Retainer Spring
Pentax 23903-0-D11-01 ASA Dial
Pentax 23903-A403 MD Cover
Genuine Pentax MD = motor drive cover for the ME, and ME Super film cameras. Where MD covers like these that are best removed with a coin(nickel). Only the outside of cover is graded on appearance. All USED MD covers look excellent + on the inside. USED part sold in condition as stated in the image. Made by Pentax Japan.
Use option to select the condition of available covers.
Pentax 23903-A405 Battery Cover
Genuine Pentax battery cover for the ME, ME Super, MG, and MV film cameras. Where battery covers like these that are best removed with a Nickle coin, only the outside of cover is graded on appearance. All used battery covers look excellent plus on the inside. USED part sold in condition as stated in the image. Made by Pentax Japan.
Use option to select the graded condition of the battery cover needed.
Pentax 23102-0-3034 Wind-Seat Assembly
Genuine Pentax wind seat assembly for the K1000 old-style, KM, KX, and Spotmatic film cameras. Assembly = more than 1 part. This assembly includes the wind seat, wind coupling pawls, pawl springs, pawl rivets, wind seat return spring, and return spring retaining screw. Sold as pictured. Made by Pentax Japan.
Canon CG1-0815 Rewind Knob
USCamera Import Canon AE-1 rewind knob assembly also fits the Pentax K1000 (Old), KM, KX, Spotmatic Series, Vivitar A3000, and the A3800 film cameras. Metal knob in chrome finish. These knobs are not the quality of a Canon part, however it is metal and fits the rewind shaft properly. These only rewind knobs I have found new. Made in China for USCamera.
Pentax 230-2-0C35 Wind-Up Lever
Genuine Pentax wind-up lever seat assembly for the S1, S2a, S3, and the Repronar. This part may fit the SV however I do not have that camera to verify fit. Brand new part. This seat is sold with the return spring wound-up on the seat with a keeper and test wind lever to hold the assembly together during shipping and installation. Part sold as pictured. Made by Pentax Japan.
IMPORTANT. DO NOT REMOVE THE SCREWS HOLDING THE WIND LEVER TO THE SEAT UNTIL YOU INSTALL THE UNIT ON THE CAMERA. THE SPRING IS WOUND UP AND WILL UNWIND WITH SOME FORCE AND POSSIBLY CUT YOUR FINGERS. You need to look carefully at the way the winding seat fits on your camera. My advice is to practice removing and installing the old part on your camera first. Some instructions in the service manual address the removal of this part from the camera, here.