Beseler Elevation Lock Kit 7001
Genuine Beseler elevation lock kit. This kit includes the clamping bars, adjustment handle and handle retaining screw. Figure #81, 82, and #141 changed to #7001 elevating lock set for the 23C, 23CII, and 23CII XL enlargers. Made by Charles Beseler USA. Exploded views for the 23C can help you find the part you need.
Beseler Front Lens Board Retaining Plate 10-44056
Genuine Beseler front lens board retaining plate #10-44056 for the 23C, 23CII, and 23CII XL enlargers. Made by Charles Beseler USA. Exploded views for the 23C can you find the part you need.
Beseler Lamp House 120 VAC Power Cord 10-43748
Genuine Beseler 110 - 120 volt AC power cord set for the lamp house. Figure #7 part #10-43748 for the 23C, 23CII, and 23CII XL enlargers. Made by Charles Beseler USA. Exploded views for the 23C can help you find the part you need.
Beseler Lamp House Seal 10-07661
Genuine Beseler lamp house light seal. Figure #32 part #10-07661 for the 23C 23CII 23CII XL enlargers. Made by Beseler USA. Exploded views for the 23C can you find the part you need.
Beseler Negative Stage Cam 10-07647
Genuine Beseler negative stage cam. Figure #73 part #10-07647-01 for the 23C 23CII 23CII XL enlargers. Made by Charles Beseler USA. Exploded views for the 23C can you find the part you need.
Beseler Negative Stage Spring 562-70-09
Beseler Negative Stage Spring Stud 10-04613-01
Genuine Beseler negative stage spring stud. Figure #124 part #10-04613-01 for the 23C 23CII 23CII XL enlargers. Made by Charles Beseler USA. Exploded views for the 23C can help you find the part you need.
Beseler Shoulder Screw 540-30-46
Genuine Beseler shoulder screw for the 23C, 23CII, and 23CII XL enlargers. #35 0n the exploded view. Made by Charles Beseler USA. Exploded views for the 23C can help you find the part you need.
Canon 5D Mark III Multi-Controller Switch
Canon A-1 Light Baffle Mirror Cage
USCamera Canon A-1 mirror cage light baffle. This baffle sheet is on the inside of the mirror box on the left side. The anti-reflective sheet Canon used had a tendency to curl as it ages. This replacement part from USCamera is a special type of poly-urethane material that was used in many film cameras produced in the 1980's and later. Just a couple camera models where I can see this baffle material was used is Nikon N2000, N2020, and later used in the Minolta XE-7 as an updated replacement part. Black adhesive tape has already been applied so to install just, peel material from the backing to apply. I strongly recommend an adhesive delay so you have time to align the baffle in place. Material made in Japan for USCamera.
Canon Angle Finder B
Canon C58-6041 USB Cable
Genuine Canon USB cable with the protector for the EOS 5Ds and EOS 5Ds R digital cameras. This cable assembly includes the cable, cable protector clip, and cable protector base assembly. The cable base and protector clip are attached to the cable when assembled. This part has been discontinued, limited stock is available. Made by Canon China.
