Canon A-1 Light Baffle Mirror Cage
USCamera Canon A-1 mirror cage light baffle. This baffle sheet is on the inside of the mirror box on the left side. The anti-reflective sheet Canon used had a tendency to curl as it ages. This replacement part from USCamera is a special type of poly-urethane material that was used in many film cameras produced in the 1980's and later. Just a couple camera models where I can see this baffle material was used is Nikon N2000, N2020, and later used in the Minolta XE-7 as an updated replacement part. Black adhesive tape has already been applied so to install just, peel material from the backing to apply. I strongly recommend an adhesive delay so you have time to align the baffle in place. Material made in Japan for USCamera.
Canon CA1-4727 Film Sprocket
Canon CA1-0977-031 LED Cover
Premium Import battery check LED cover ring for the Canon A1 film cameras. Made by USCamera China.
The cover ring is held in place with a small amount of contact cement. Please note 2 sizes of this cover were used. This is the small cover measuring 3.1mm.  If you don't know the measurement of your cover just measure the LED.  It should measure a little less than 3.1mm or 3.3mm. Only the 3.1mm small cover is available.
Canon CY3-1908 Battery Cover
Canon CF1-1441-B Eyepiece Frame
Canon CB1-5128 Command Dial-E
Canon CB1-2553 Grip Contact
Canon CG2-5544 Battery Cover
Canon CB5-5921-000 Black Screw
Canon SD Card Slot | 5D Mark IV
Canon CY2-0594 Wind Lever Cover
Canon CA1-4949 Rewind Shaft
Canon CY3-1384 Back Cover
Genuine Canon replacement back cover shell for the EOS Rebel 2000, and the EOS 300 Non-QD (Quartz-Date) film cameras. Made by Canon Japan.
Please Note. The film reminder is already installed. You will need to transfer the pressure plate and other small parts from your old back cover to the new back cover.