Konica AutoReflex TC Seals
This custom light seal kit fits the Konica AutoReflex T4 and TC film cameras. This kit includes 2 door channel seals, door hinge seal, latch plate seal on back cover, mirror cushion and 3 additional seals used in the viewfinder or focusing screen area.
USCamera light seal placement guide for this Konica film camera here.
Konica C35 Light Seals
USCamera custom light seal kit fits the Konica C35 Auto film cameras. This 5 piece light seal kit includes 2 channel seals lower/upper for the back cover, back cover latch plate baffle seal, back cover hinge baffle plate seal and the hinge seal on the camera body.
USCamera light seal placement guide for this Konica film camera, go here.
Konica C35-EF Light Seals
USCamera custom light seal kit fits the Konica C35 EF film cameras. This 4 piece light seal kit includes 2 door channel seals for the camera body, latch plate seal on the camera body, and the hinge seal on the back cover. Premium black open-cell foam. Made in Japan for USCamera
Light seal removing and installation help is always available.
Placement guide for this Konica camera. Coming Soon!
Removing the foam from the backing can be difficult for some. This video may help.
Konica FS-1 Light Seal Kit
This USCamera custom light seal kit fits the Konica FS-1 35mm film cameras. This 6 piece kit includes lower/upper door channel seals, 1 special cut back cover hinge end seal, back cover latch end seal, and custom cut 3 piece Fresnel frame set. Please note this Konica uses 2 rubber pieces in the upper and lower channels on the back cover approximately 20mm from the hinge end. Those parts do not need to be removed and should be left alone.
USCamera light seal placement guide for this Konica film camera here (coming soon).
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Konica FT-1 Motor Light Seals
This custom light seal kit fits the Konica FT-1 Motor 35mm film cameras. This 11 piece kit includes 2 door channel seals, 1 door hinge seal, upper/lower channel seals back cover hinge end, custom latch plate seal on back cover, upper/lower channel seals back cover latch end, and 3 piece seal set used in the viewfinder or focusing screen area.
USCamera light seal placement guide for this Konica film camera here (coming soon).
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Konica SII Light Seals
USCamera custom light seal kit fits the Konica S II film cameras. This 3 piece light seal kit includes 2 door channel seals for the camera body and the hinge seal on the camera body. Also note: This kit is not correct for the Konica Auto SII.
USCamera light seal placement guide for this Konica film camera, go here.
Kowa Super 66 Body Light Seals
USCamera custom foam light seal kit for the Kowa Super 66 SLR 120-220 body light seal kit. This 4-piece body kit includes the mirror cushion, left/right mirror frame seals, and back frame seal. Give yourself sometime to position these seals. I blogged about this install. I strongly recommend using an adhesive delay. All seals have the adhesive applied. Just remove the backing and press into place. Premium black open cell foam. Made in Japan.
Light seal installation and removal help is always available online.
Peeling the foam from the backing can be difficult for some. This video may help
Light seal placement guide for the Super 66 body and film back, Coming soon!
Kowa Super 66 Film Back Seals
USCamera custom foam light seal kit for the 120/220 films used with the Kowa Super 66 SLR. Please note this kit uses non-adhesive foam. This 6-piece kit includes 2Â x 2.0T x 2.0 T x 200L strips for the back cover channels, 2 x 1.5T x 1.5T x 200 L the film back door channels, and 2 x 2.5 T strips for the latch plate. I blogged about this install. Premium black open cell foam. Made in Japan.
Light seal installation and removal help is always available online.
Light seal placement guide for the Super 66 body and film back, Coming soon!
Peeling the foam from the backing can be difficult for some. This video may help
Leica R3 Light Seals
USCamera custom light seal kit fits the Leica R 3, and R 3MOT film cameras. This premium 5 piece kit includes 2 long channel seals on the body, 1 short upper back channel seal on the back cover, 1 door hinge seal on back cover and the film reminder window foam. Please note, the R 3 and R 3MOT do not use a foam mirror cushion.
USCamera light seal placement guide for this Leica film camera here. Coming soon!
Leica R3 Reminder Window Foam
USCamera custom cut film reminder window foam seal for the R4 film cameras. The adhesive is already applied. Just remove the backing, and press into place. Package of 2 window seals. USCamera foam is Made in Japan.
Light seal placement guide for the R4 film camera here. (coming soon).
Old foam removal and replacement information is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Leica R3 Reminder Window-Foam
USCamera custom cut film reminder window foam seal for the Leica R 3, and R 3MOT film cameras. The adhesive is already applied. Just remove the backing, and press into place. Package of 2 window seals. USCamera foam is Made in Japan. Light seal placement guide for the R 3 film camera here. (coming soon)
Leica R4 Light Seals
USCamera custom light seal kit fits the Leica R4, R4s, R5, and R5 cameras. This kit will not fit the R3 as that model uses a different body casting.
This premium 11 piece kit includes 2 long channel seals on the body, 1 short channel seal on the body hinge end to counter lever, 2 channel seals on back cover (hinge end), 1 door hinge seal on back cover, short upper/lower back cover channel seals latch end, left/right mirror cushions and the film reminder window foam.
USCamera light seal placement guide for this Leica film camera here
