Hasselblad #13067 Light Baffle
Hasselblad #22422 Light Baffle
Hasselblad #22828 Light Baffle
Kalimar K-90 Custom Light Seal Kit
This USCamera 6 piece custom light seal kit is made for the Kalimar K-90 35mm SLR film camera. The kit includes lower/upper channel seals on the body, mirror cushion, hinge seal on back cover, top channel seal hinge end and the latch plate seal, latch end on the back cover.
USCamera light seal placement guide for this Kalimar film camera, go here
Koni-Omega Film Back Light Seals
USCamera custom cut light seal kit for the Koni-Omega Rapid 120 and 220 film backs. When looking at the pressure plate, this 5-piece light seal kit includes the left channel L-shaped seal, right channel, upper channel, lower channel, and the special foam seal for the wind clutch housing channel*. Premium Black Open Cell Foam. Made in Japan.
*Removal of the original housing channel seal is not recommended.
The USCamera light seal placement guide for this kit is online.
Koni-Omega Lens Mount Base Seal
Konica Auto S3 Seals
This USCamera custom light seal kit fits the Konica Auto S3 rangefinder 35mm film cameras. All of the light seals used to seal the film chamber area of this camera are on the back cover. This 6 piece kit includes 1 back cover top channel seal, 1 back cover bottom channel seal, 1 back cover latch plate seal, 1 each top/bottom foam for film cassette spring and back cover hinge side seal.
USCamera light seal placement guide for the this Konica camera, go here
Konica Auto-S2 Light Seals
Konica AutoReflex A2 Seals
USCamera custom light seal kit fits the Konica AutoReflex A, A1000, A2, A3, T, T2, T3, and the T3n 35mm film cameras. The body casting used for these models is the same. This 5 piece foam seal kit includes lower/upper door channel seals for the camera body, camera body hinge seal, back cover door latch plate seal, and a mirror cushion.
USCamera light seal placement guide for this Konica, go here
Konica AutoReflex TC Seals
This custom light seal kit fits the Konica AutoReflex T4 and TC film cameras. This kit includes 2 door channel seals, door hinge seal, latch plate seal on back cover, mirror cushion and 3 additional seals used in the viewfinder or focusing screen area.
USCamera light seal placement guide for this Konica film camera here.
Konica C35 Light Seals
USCamera custom light seal kit fits the Konica C35 Auto film cameras. This 5 piece light seal kit includes 2 channel seals lower/upper for the back cover, back cover latch plate baffle seal, back cover hinge baffle plate seal and the hinge seal on the camera body.
USCamera light seal placement guide for this Konica film camera, go here.
Konica C35-EF Light Seals
USCamera custom light seal kit fits the Konica C35 EF film cameras. This 4 piece light seal kit includes 2 door channel seals for the camera body, latch plate seal on the camera body, and the hinge seal on the back cover. Premium black open-cell foam. Made in Japan for USCamera
Light seal removing and installation help is always available.
Placement guide for this Konica camera. Coming Soon!
Removing the foam from the backing can be difficult for some. This video may help.
Konica FS-1 Light Seal Kit
This USCamera custom light seal kit fits the Konica FS-1 35mm film cameras. This 6 piece kit includes lower/upper door channel seals, 1 special cut back cover hinge end seal, back cover latch end seal, and custom cut 3 piece Fresnel frame set. Please note this Konica uses 2 rubber pieces in the upper and lower channels on the back cover approximately 20mm from the hinge end. Those parts do not need to be removed and should be left alone.
USCamera light seal placement guide for this Konica film camera here (coming soon).
Konica FT-1 Motor Light Seals
This custom light seal kit fits the Konica FT-1 Motor 35mm film cameras. This 11 piece kit includes 2 door channel seals, 1 door hinge seal, upper/lower channel seals back cover hinge end, custom latch plate seal on back cover, upper/lower channel seals back cover latch end, and 3 piece seal set used in the viewfinder or focusing screen area.
USCamera light seal placement guide for this Konica film camera here (coming soon).
Konica SII Light Seals
USCamera custom light seal kit fits the Konica S II film cameras. This 3 piece light seal kit includes 2 door channel seals for the camera body and the hinge seal on the camera body. Also note: This kit is not correct for the Konica Auto SII.
USCamera light seal placement guide for this Konica film camera, go here.
Kowa Super 66 Body Light Seals
USCamera custom foam light seal kit for the Kowa Super 66 SLR 120-220 body light seal kit. This 4-piece body kit includes the mirror cushion, left/right mirror frame seals, and back frame seal. Give yourself sometime to position these seals. I blogged about this install. I strongly recommend using an adhesive delay. All seals have the adhesive applied. Just remove the backing and press into place. Premium black open cell foam. Made in Japan.
Light seal installation and removal help is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light seal placement guide for the Super 66 body and film back, Coming soon!
Kowa Super 66 Film Back Seals
USCamera custom foam light seal kit for the 120/220 films used with the Kowa Super 66 SLR. Please note this kit uses non-adhesive foam. This 6-piece kit includes 2Â x 2.0T x 2.0 T strips for the back cover channels, 2 x 1.5T x 1.5T x 200 L the film back door channels, and 2 x 2.5 T strips for the latch plate. I blogged about this install. I strongly recommend using an adhesive delay. Premium black open cell foam. Made in Japan.
Light seal installation and removal help is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light seal placement guide for the Super 66 body and film back, Coming soon!
Leica R3 Light Seals
USCamera custom light seal kit fits the Leica R 3, and R 3MOT film cameras. This premium 5 piece kit includes 2 long channel seals on the body, 1 short upper back channel seal on the back cover, 1 door hinge seal on back cover and the film reminder window foam. Please note, the R 3 and R 3MOT do not use a foam mirror cushion.
USCamera light seal placement guide for this Leica film camera here. Coming soon!
