Pentax K1000 Pro Pack-10
USCamera K1000 Pro Pack-10. This 44 piece light seal package will seal 10 Pentax film cameras like the K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and ES II film cameras. New style K1000 uses 5 screws to retain the bottom cover and the battery cover is plastic. This light seal package includes,
- 24 lower or upper body channel seals(165mm L)
- 10 body hinge seals
- 10 mirror cushions
Koni-Omega Lens Mount Base Seal
Minolta Hi-Matic G2 Seals
USCamera custom light seal kit fits the Minolta Hi-Matic G2 film cameras. This light seal kit includes 2 door channel seals on the camera body, 1 latch plate seal, 1 counter lever seal and 1 door hinge seal on the camera body.
USCamera light seal placement guide for this Minolta camera here
Olympus Infinity Stylus Light Seals
USCamera custom foam light seal kit for the Olympus EE2, and EE3 35mm film cameras. This 4-piece kit includes the upper channel seal on the camera body, the lower body channel seal, the short back cover lower channel seal, and the film reminder window foam. Give yourself sometime to position special seals. I strongly recommend using an adhesive delay when installing the upper body channel seal. All seals have the adhesive applied. Just remove the backing and press into place. Premium open cell foam, Made in Japan.
Light seal installation and removal help is always available online.
Peeling the foam from the backing can be difficult for some. This video may help.
Light seal placement guide for the Infinity Stylus, Coming soon!
Light Seal Strips 1.5T – 26 Pieces
USCamera TEK-PACK of pre-cut imported black open cell foam strips. These assorted strips have the adhesive applied and are 1.5mm thick X 185 mm long x 26 pieces. Made by USCamera.
- 6 Strips 185mm Long 1.30mm Wide 1.5mm Thick
- 6 Strips 185mm Long 1.40mm Wide 1.5mm Thick
- 6 Strips 185mm Long 1.60mm Wide 1.5mm Thick
- 4 Strips 185mm Long 2.00mm Wide 1.5mm Thick
- 4 Strips 185mm Long 2.25mm Wide 1.5mm Thick
Yashica Electro 35 GX Light Seals
USCamera custom light seal kit for the Yashica Electro 35 GX film cameras. This 4 piece custom cut foam kit includes lower/upper door channel seals on the back cover, back cover hinge seal, and the latch plate seal on the back cover.
USCamera light seal placement guide for this Yashica film camera, here. Coming Soon!!
Nikon N2000 Light Seals
USCamera custom light seal kit fits the Nikon N2000 film camera. This light 7 piece seal kit includes 2 door channel seals for the body, the door hinge seal on the back cover, right /left mirror cushions and a film reminder window seal. Also included is a seal (not shown) for the back cover, top channel at the hinge end. The original flat black seal placed there is usually in good condition. Look at it carefully, very thin flat black seal. We only recommend replacing that piece if it is missing or damaged.
USCamera placement guide for this Nikon film camera here
Fujica ST901 Light Seals
USCamera custom light seal kit for the Fujica ST901 film cameras. This 10 piece custom USCamera foam kit includes lower/upper back cover channel seals, door hinge seal on the back cover, back cover latch plate seal, lower/upper latch plate seal on the camera body, lower/upper camera body channel seals, a replacement mirror cushion and the back cover film reminder window seal.
TECH NOTE. The channel seals on the camera body are not installed starting at the hinge end of the body, like many cameras. Lens mount facing down. For the ST901, these seals are carefully centered in the straight part of the body channels, before the channel turns downward. When installed properly, there will be little if any that seal material leftover. That is the factory install procedure. Also, the proper seals required there are shorter than you would imagine.
UScamera light seal placement guide for this Fujica film camera go here.
Light Seals Cut 220Lx1.70Wx1.5T-A
Light Seals Cut 220Lx1.50Wx1.5T-A
Olympus ECR Light Seals
USCamera custom light seal kit for the Olympus 35 ECR rangefinder film cameras. This seal kit includes 2 door channel seals for the camera body, 2 back cover channel seals, and 1 door hinge seal on the camera body.
USCamera custom light seal placement for this Olympus film camera here
Vivitar XC3-XC4 Light Seals
 USCamera custom light seal kit for the Vivitar XC-1, XC-2, XC-3, and the XC-4 film cameras. This 6 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, lower/upper door channel seals latch end, back cover, and 1 door hinge seal for the camera body.
USCamera light seal placement guide for this Vivitar film camera here.
