Koni-Omega Rapid Film Back Placement Guide | Koni-Omega Rapid Film Back | 120 or 220 Roll Film
Before doing anything, please read about light seal foam removal and installation.
Koni-Omega Rapid Film Back Placement Guide | 120 or 220
For more information on purchasing this Koni-Omega kit.
I am describing the placement of this kit as if you are looking at the film back, film pressure plate side with the rapid advance lever on the lower left.
This 5-piece light seal kit for Koni-Omega film back includes,
top channel seal 1 x 1.5mm
lower channel seal – 1 x 1.5mm
left channel seal, reverse L shape – 1 x 1.5mm
right channel seal – 1 x 1.5mm
film advance clutch housing, special seal – 1.5mm thick
