Our service/installation information discussed in this
section, is drawn from the experience of 4 photo equipment technicians
servicing photo related products from 1975 - 2005 including film/digital
accessories, battery grips, cameras, darkroom, flash, lenses, motor
drives and more. All
technicians were factory trained on different models. All worked, at
some time in their career worked in shops where warranty service was
provided on some brands. All performed
in and out of warranty service on different makes and models. Total of over 100
years combined service experience.
We believe we sell the finest camera light seals
We start with premium materials.
Imported open cell foam from Japan. The finest we
Manufactured to precise thickness and density,
specifically for photo and imaging applications.
are machine cut for accuracy and consistency.
The kit you
purchased from us 20 years ago, uses the same premium materials you will
When we make
a new kit, we use a real camera and take
measurements for all seals required directly from that sample.
Next, we make sure the fit is perfect with the backing in place. Last we
do a real install to make sure the seals fit properly.
Some equipment changed over years of production and we make sure
our kits include all seals for all years or required changes.
No customer has every
reported a light leak after installing one of our kits.
We have 10's of thousands of pieces in
stock and can perfectly match the width and thickness required for most
any application you may have. The foam pieces we currently stock are 215
mm long starting at 1.2 mm wide to 11 mm wide. Thickness
of 1mm 1.5 mm 2mm, 3mm and 4mm are
We can custom cut most any width of the open cell self
adhesive foam we stock. 100 mm W x 215 L cutting area. Thickness
of 1mm 1.5 mm 2mm 3 mm and 4 mm available. Minimum purchase required on
custom cutting. Send us an email for more information.
We may offering longer and wider product in the future. Email us if that