Minolta X700 Light Seals
USCamera custom light seal kit for the Minolta X300, X300x, X370, X370n, X370s, X370, X500, X570, X600, X7, X7a, X700, and X9 film cameras. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover. Please note that some cameras may use a film reminder window that requires foam, at this time we do not have a source for that seal, and is not included in this kit.
Please note this is an "N" kit for the X Series listed and updates the older cameras also. Adding the short top and bottom back cover channel seals, hinge end updates the camera. Minolta determined that under certain outside lighting conditions, the film perforations could be slightly fogged near the counter lever.
USCamera light seal placement guides for this Minolta film cameras here.Â
Installation and removal instructions always available online 24/7.
Olympus XA Light Seals
USCamera custom light seal kit for the Olympus XA compact rangefinder film camera. Only fits the model listed. This seal kit includes 2 door channel seals for the camera body, 2 door channel seals on the back cover, 1 back cover door hinge seal, and 1 door latch plate seal on the back cover.
USCamera light seal placement guide for this Olympus film camera here.
Olympus OM-1 Light Seals
USCamera custom light seal kit for the Olympus models OM 1, OM 1n, OM 2 and OM 2n, OM-3, OM-4, and OM-4T. This seal kit includes 2 door channel seals for the camera body, 1 camera body door hinge seal and a 4 piece mirror cushion set.
USCamera light seal placement guide for this Olympus film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Placement guide for this light seal kit, go here.
Canon AE-1 Light Seals
USCamera custom light seal kit for the Canon A1, AE1, AE1-P, AT1, and AV1. This kit includes 2 door channel seals, door hinge seal on the back cover, door hinge seal on the camera body, and a replacement mirror cushion. Premium quality open-cell foam Made in Japan. This Canon kit is currently on sale, buy 2 get 1 free, no limit.
Use option and select one or more kits
USCamera light seal placement guide for this Canon film camera here.
Old foam removal and replacement information is always available online.
Fuji GSW690-III Light Seals
USCamera custom Light Seal Kit for the Fuji GW690 III GSW 690 III film cameras. This light seal kit consists of 2 door channel seals for the back cover, 1 latch plate seal on the back cover and 1 back cover door hinge seal.
Light seal placement guide for this Fuji camera here.
Mamiya Light-Seals Super 23
USCamera custom light seal kit for Mamiya Press or Super 23 6x9, 6x7, and 645 film backs. Â This is the replacement seal kit that includes 2 door channels seals on the door, 2 front plate seals where the back attaches to the camera(supplied in 2 pieces for ease of installation), the door hinge seal, and the door latch plate seal.
USCamera light seal placement guide for this Mamiya film back here.
Minolta SRT Light Seals
USCamera custom light seal kit for the Minolta SR and SRT Series film cameras. Including the SRM, SR505, SR505s, SR101, SR101s, SR-T 100, 100X, 101, 101b, 102 , 103, 200, 201, 202, 303b, SC, SC-II, MC, MC II and SR-T Super. There may be more models. This seal kit consists of 2 door channel seals on the camera body, hinge seal, mirror cushion and the mirror baffle cushion. Please note that the door hinge seal is made of a felt type material and does not need to be replaced, though is included in the kit.
USCamera light seal placement guide for this Minolta film camera here
Nikon F2 Light Seals
USCamera custom light seal kits for the Nikon F2 film cameras. The F2 may be known by a few designations due to the meter attached. F2S, F2 Photomic, etc.
We stock 5 and 9 piece foam kits for this Nikon model.
The 5 piece kit includes lower/upper door channel seals for the camera body, 1 mirror cushion, 1 finder rest that cushions the back of the viewfinder when mounted on the camera body, and the seal on the back cover by the door latch.
The 9 piece kit includes everything from the 5 piece kit Plus the left/right foam seals just behind the mirror cushion. Also the 2 foam seals used on the bottom of the DP view finders, left and right of the serial # plate. Those seals prevent the left and right covers screws from marring the bottom of the finder. Please note. I have owned F2 bodies that used a felt type seal by the door latch. I do not recommend replacing that seal with foam.
Use option to select quantity and 5-piece or 9-piece light seal kits.
USCamera light seal placement guide Nikon F2 camera 5-piece kit, go here.
USCamera light seal placement guide Nikon F2 camera 9-piece kit, go here. Soon!
Rollei TLR Repair Manual
Digital presentation of a genuine Factory Rollei Twin Lens Reflex repair manual, part lists, exploded views, and more. The manual includes all required adjustments, troubleshooting, and more for the Rollei Twin Lens Reflex cameras listed. In August of 1972, this manual was made available to technicians, repair shops, and service centers. This is the most complete factory service manual ever produced by Rollei for these TLR cameras. However, it did not include every TLR they ever made. The service manual includes Rolleicord V, VA, VB, Rolleiflex 3.5 F, 3.5 E2, 3.5 E3, 2.8 E, 2.8F, 2.8 E2, 2.8 E3, 4x4, T, Rolleimagic, Rolleimagic II and Tele Rolleiflex 220. High-Resolution scans of an original factory service manual. Amazing detail at 600 DPI resolution. Easy 600% magnification. Written in German and English. Download available immediately after payment is accepted. 2 download limit for the file(s) purchased never expires.
Make sure your download is delivered smoothly and hassle free. Make a user account when checking out. More information on that here.
493 page PDF 48.3 MB
Rollei TLR Repair Manual
Mamiya C-Series Light Seals
USCamera custom back cover light seal kit for the most Mamiya C-Series TLR Camera Bodies including the C2, C22, C220, C220f C3, C33, C330, C330f, and the Mamiya Flex C. This kit includes the door hinge seal on the back cover and the top/left / right door seal on the back cover. The light seals have the adhesive already applied and to install you just peel off the backing and press into place. Top Quality seals made of imported open cell foam. Tech note: When installing this kit on the MamiyaFlex, you may need to cut the length of upper and lower channel seals. It appears from the cameras we have, the Mamiya flex door is a slightly smaller than the newer model Mamiya TLRs. Need the C330-S kit?
USCamera light seal placement guide for this Mamiya go here.
Helpful advice on light seal remove and replace is always available.
Peeling the foam from the backing can be difficult for some. This video may help.
Minolta XG Light Seals
USCamera custom-made light seal kit for the Minolta XG Series film cameras both new and old-style including XG1, XG7, XG9, XGM, XG-A, XG SE, and more. New style cameras have the "world" logo in the letter "O" on the top cover's front nameplate. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, and 1 door hinge seal on the back cover. The "N" model update and addition to the old style XG's are the 2 small seals by the door hinge seal on the back cover.
Light Seal Placement guide for this Minolta light seal kit, here.
Peeling the foam from the backing can be difficult for some. This video may help.
