Light Seals
USCamera | Foam Seal Kits | Vintage Film Cameras
Foam Light Seals, Foam Sheets, Foam Strips
USCamera seal kits have been successfully installed in tens of thousands of different film cameras and equipment.
When you purchase USCamera foam seals, you may buy with the confidence knowing you are using a proven product.
The same quality as the original manufacturer installed in your equipment.
In addition to custom foam seal kits for film cameras, USCamera also stocks digital camera, flash, and lens parts.
Also New Vintage film camera parts for Canon, Minolta, Nikon, Olympus, Pentax, Rollei and many more.
Furthermore, thousands of part lists and service manuals are in stock for instant download.
Of course, we stock photo grade foam sheet, the same foam used in our seal kits.
See our full line of foam sheets, cut strips, and all seal kits in stock.
Foam seal kit installation guide.Following the link to that short read can improve the quality of your light seal installation.
USCamera seal kit placement guides can really help you…Especially if the old light seals have already been removed before you acquired the camera.
USCamera | Seal Kits, Foam Sheets, Cut Strips | Foam Seal Install plus Placement Instructions | Service Manual – Parts List Downloads | Light Seals
Lastly, always made to inspire…see New film camera products.
Door Channel Foam – 195mm Long – No Adhesive
USCamera imported Black open cell door channel foam without adhesive. These strips are 195mm long. Available in thicknesses of 1.50mm, 2.00mm, 2.50mm, 3.00mm with various widths. Made in Japan for USCamera.
These seals are the most common sizes used for most film cameras. I find them much easier to install than adhesive backed foam and more permanent when glued down with contact adhesives like Pliobond. Just a few examples of the applications for these foam seals...
- a 1.5 x 1.5 seal was used in the body channels on the Nikon FE, FG and FM series cameras and more. The Minolta SRT, and X series body channels also use a 1.5 x 1.5 foam seal.
- a 2.0 x 2.0 seal was used in the body channels for the Canon A-Series camera. Also fits the OM series cameras body channels.
- a 3.0 x 3.0 can be used the Mamiya TLR cameras back cover.
- a 3.0 x 3.0 seal strip can be cut to 39mm long and used as a mirror cushion for most of the A-Series cameras.
Bamboo Light Seal Tools
Light Seals, Canon Light Seals, Contax Light Seals, Cosina Light Seals, Fuji Fujica Light Seals, Kalimar Light Seals, Koni-Omega Light Seals, Konica Light Seals, Leica Light Seals, Light Seal Sheets, Light Seal Strips, Mamiya Light Seals, Minolta Light Seals, Miranda Light Seals, Nikon Light Seals, Olympus Light Seals, Pentax Light Seals, Petri Light Seals, Plaubel Light Seals, Praktica Light Seals, Ricoh Light Seals, Vivitar Light Seals, Yashica Light Seals, Tools
Many customers have asked additional quantities of the pointed bamboo tools included with our kits. I find tools like this is invaluable when installing/placing light seals and more. I've used these to hold small parts in place while I installed screws. The bamboo tools are small, light with somewhat polished ends. 2.5mm wide x 150mm long. Package of 10 pieces.
See all available USCamera light seal placement guides for film cameras here.
Canon AE-1 Light Seals
USCamera custom light seal kit for the Canon A1, AE1, AE1-P, AT1, and AV1. This kit includes 2 door channel seals, door hinge seal on the back cover, door hinge seal on the camera body, and a replacement mirror cushion. Premium quality open-cell foam Made in Japan. This Canon kit is currently on sale, buy 2 get 1 free, no limit.
USCamera light seal placement guide for this Canon film camera here.
Use option and select one or more kits
Nikon FE FM Light Seals
USCamera custom light seal kit for the Nikon FE FE2 FM FM2 FM2n FM2T film cameras. This USCamera custom kit includes lower/upper door channel seals for the camera body, 1 door hinge seal for the camera body, and 1 mirror cushion. Premium foam made in Japan. This Nikon kit is currently buy 2 get 1 free, no limit.
Use option to select 1 or more light seal kits.
Information guide for removing/replacing foam seals is always available.
Light seal placement guide for the Nikon FE FM film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Pentax K1000 Light Seals
USCamera light seal kit will fit the Pentax K1000, K2, Kx, Km, Spotmatic, Spotmatic F, Spotmatic II, Spotmatic IIa, Spotmatic SP, Spotmatic SP500, Electro Spotmatic, ES, and the ESII film cameras. All of those cameras use the same basic body casting. This kit includes lower/upper channel seals (body), camera body hinge seal, and a mirror cushion. Please note we do not recommend removing/replacing the original hinge seal unless it is damaged. It is made of special material and to date, we are not seeing that seal decayed on the cameras we have in stock.
Placement guide for this light seal kit, go here.
Minolta X700 Light Seals
USCamera custom light seal kit for the Minolta X300, X300x, X370, X370n, X370s, X370, X500, X570, X600, X7, X7a, X700, and X9 film cameras. This light seal kit includes 2 door channel seals for the camera body, 1 mirror cushion, 1 door hinge seal on the back cover and 2 small seals by the door hinge seal on the back cover. Please note that some cameras may use a film reminder window that requires foam, at this time we do not have a source for that seal, and is not included in this kit.
Please note this is an "N" kit for the X Series listed and updates the older cameras also. Adding the short top and bottom back cover channel seals, hinge end updates the camera. Minolta determined that under certain outside lighting conditions, the film perforations could be slightly fogged near the counter lever.
USCamera light seal placement guides for this Minolta film cameras here.Â
Installation and removal instructions always available online 24/7.
Nikon FE Pro Pack-10
USCamera Nikon Pro Pack-10. This 44 piece light seal package will seal 10 Nikon film cameras like the FE, FE2, FM, FM2, FM2n, and FM2T film cameras. This Pro Pack light seal package includes,
- 24 lower or upper body channel seals (165mm L)
- 10 body hinge seals
- 10 mirror cushions
Olympus XA Light Seals
USCamera custom light seal kit for the Olympus XA compact rangefinder film camera. Only fits the model listed. This seal kit includes 2 door channel seals for the camera body, 2 door channel seals on the back cover, 1 back cover door hinge seal, and 1 door latch plate seal on the back cover.
USCamera light seal placement guide for this Olympus film camera here.
Olympus OM-1 Light Seals
USCamera custom light seal kit for the Olympus models OM 1, OM 1n, OM 2 and OM 2n, OM-3, OM-4, and OM-4T. This seal kit includes 2 door channel seals for the camera body, 1 camera body door hinge seal and a 4 piece mirror cushion set.
USCamera light seal placement guide for this Olympus film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Minolta SRT Light Seals
USCamera custom light seal kit for the Minolta SR and SRT Series film cameras. Including the SRM, SR505, SR505s, SR101, SR101s, SR-T 100, 100X, 101, 101b, 102 , 103, 200, 201, 202, 303b, SC, SC-II, MC, MC II and SR-T Super. There may be more models. This seal kit consists of 2 door channel seals on the camera body, hinge seal, mirror cushion and the mirror baffle cushion. Please note that the door hinge seal is made of a felt type material and does not need to be replaced, though is included in the kit.
USCamera light seal placement guide for this Minolta film camera here
Canonet QL17-GIII Light Seals
USCamera custom Canon light seal kit fits the New Canonet QL 17, QL 17-L, QL 17 GIII, QL 19 GIII, QL 19N, and the Canonet 28 rangefinder cameras. The kit includes 1 upper channel seal on the camera body, 2 latch plate seals on the back cover, 1 latch channel seal on the back cover, 1 upper and 1 lower seal on the back cover. All seals have adhesive already applied and to install you just peel off the foam from the backing and carefully place it. This Canon kit is currently on sale, buy 2 get 1 free, no limit.
Use option and select one or more kits.
USCamera light seal placement guide for this Canon film camera here.
Peeling the foam from the backing can be difficult for some. This video may help.
Mamiya RB Film Back Seals
This USCamera custom seal kit set will service all RB 67 RB 67 Pro/Pro S 120, 220, and 645 film backs. The RB film back consists of the shell and insert. In checking these film backs for years, if the shell seals are bad so are the insert seals, therefore I recommend replacing them as a set.
The 6 piece insert kit includes channel seals for the front of the top and bottom covers, top/bottom seals left guide roller plate and top/bottom seals right guide roller plate.Â
The 4 piece shell kit includes 2 door channel seals on the back cover, 1 back cover hinge seal and 1 back cover door latch seal.
Also, check the revolving adapter. When the film back seals are sticky, the revolving adapters foam is usually sticky also. Mamiya made different adapter plates for the RB Pro and the RB Pro S/Pro SD. Links to the placement guides will show you what you need to know about them.
We have received many orders for the seals either for shell or insert only. I contacted many of those customers and most didn't realize they needed to check the other half of the set. That being said, if you are absolutely positive you want to purchase them separately, go here shell or insert.
USCamera RB 67 film back placement guide will help with installing these kits. Look here.
